This kit is designed for 24v battery by connecting 2 x 12v in series.
Panel wiring should be 2 + 3 in parallel
Solar Kit Contents:
• 5 x 100w Poly solar panel
• 30A MPPT Charge Controller
• Solar power to controller cable - 2 x 5M, 4mm2, single Core with MC4 connectors
• Controller to Battery Cable - 3 Metre 4mm2 single core cable, with 30A inline fuse and 8mm ring connectors
• Battery Terminals (pair)
• Y Branch connectors (pair)
• 20 aluminium mounting brackets
Technical Specifications - 100 Watt Solar Panel - (with 1m Cable & MC4 Connector Plugs)
• Max Power: 100w
• Max Power Voltage: 18.0v
• Max Current: 5.56A
• Open Circuit Voltage: 22.54v
• Short Circuit Current: 5.94A
• Weight: 7.4kg
• Size: 1000 x 680 x 30mm
• Maximum System Voltage: DC1000v
• Power Tolerance: ±3%
Technical - Tracer AN Series 3210AN
• Nominal System Voltage 12/24V Auto
• Battery Input Voltage Range 8V ~ 32V
• Max Charge/ Discharge Current 30A
• Max. PV Open Circuit Voltage 100V (At minimum operating environment temp)
• Max. PV Open Circuit Voltage 92V (At 25 Deg C operating environment temp)
• MPPT Voltage Range +2V ~ 72V
• Max Rated Charging Power (30A), 390W (12V), 780W (24V)
• Max. PV Array Input Power 1170W (12V), 2340W (24V)
• Wiring Connections, Solar +/-, Battery +/-, Power Output +/-, Temp Sensor, COM RJ45
• Working Environment Temperature Range - 25 to +45 Deg C
• Humidity Range <95%
• Enclosure IP30
• Dimensions 228mm x 164mm x 55mm
• Power Terminals 6AWH (12mm sq)
• Weight 1.2Kg
Solar Panels to Controller Cable
• 2 X single core 4mm2 solar PV Cable, TUV Approved
Solar controller to Battery Cable
• 2 X single core 4mm2 solar PV Cable, with 30A inline fuse and 8mm ring terminals TUV Approved.
All cabling carefully design to minimise voltage drops and maintain maximum system efficiency
• Light weight
• 100mm long
• Supplied as 4 brackets per panel
• Male Male Female & Female Female Male connectors
• 1000V DC or 30A max
• 4mm2 solar Cable
• IP66 waterproof
Important information regarding Charge Controllers - MPPT
Warning: The Connection Order Below must be followed
1. Battery Cable
2. Load Cable
3. Solar Panel Cable
Do not install the charge controller in a sealed enclosure where battery gases can accumulate.
Tracer AN Series – product features:
• Advanced maximum Power point tracking (MPPT) technology, with efficiency no less than 99.5% with 10-30% more power to the battery than cheaper PWM controllers.
• High quality components with maximum conversion efficiency of 98%
• Ultra fast tracking speed and guaranteed tracking efficiency
• Reliable automatic limit function of maximum PV input power, ensuring no overload risk.
• Wide maximum PowerPoint operating voltage range
• 12/24V DC automatic battery detection
• LCD panel display providing operating data and working conditions
• Supports 3 pre-programmed charging options, sealed, gel and flooded batteries
• Battery temperature compensation function
• Includes RS-485 communication bus interface and mod bus communication protocol
• RS-485 plug socket port can be used for PC monitoring via USB connection, this socket can also be used for connecting the MT50 external display unit to show real-time data and parameter settings.
• Remote temperature sensor connection port, to remotely detect battery temperature allowing and MPPT technology to adjust parameters.
• The controller has a three stage battery charging algorithm (bulk charging, constant charging and flow charging) for rapid, efficient and safe battery charging.
Questions & answers
All you need to know about this product from our experts
No questions have been asked (yet). So you can get started as soon as you are ready!