600w Mono Solar Panel Kit 24V with MPPT Controller

This kit is designed for 24v battery by connecting 2 x 12v in series

Panel wiring should be 3 + 3 in parallel

Solar Kit Contents -

6 x 100w Mono solar panel

30A MPPT Charge Controller

Solar power to controller cable - 2 x 5M, 6mm2, single Core with MC4 connectors

Controller to Battery Cable - 1.5 Metre 4mm2 single core cable, with 30A inline fuse and 8mm ring connectors

Battery Terminals (pair)

Y Branch connectors (pair)

24 aluminium mounting brackets

Technical Specifications - 100 Watt Solar Panel - (with 1m Cable & MC4 Connector Plugs)

Max Power: 100w

Max Power Voltage: 18.0v

Max Current: 5.56A

Open Circuit Voltage: 22.54v

Short Circuit Current: 5.94A

Weight: 6.9kg

Size: 1200 x 540 x 30mm

Maximum System Voltage: DC1000v

Power Tolerance: ±3%

Technical - Tracer AN Series 3210AN

Nominal System Voltage 12/24V Auto

Battery Input Voltage Range 8V ~ 32V

Max Charge/ Discharge Current 30A

Max. PV Open Circuit Voltage 100V (At minimum operating environment temp)

Max. PV Open Circuit Voltage 92V (At 25 Deg C operating environment temp)

MPPT Voltage Range +2V ~ 72V

Max Rated Charging Power (30A), 390W (12V), 780W (24V)

Max. PV Array Input Power 1170W (12V), 2340W (24V)

Wiring Connections, Solar +/-, Battery +/-, Power Output +/-, Temp Sensor, COM RJ45

Working Environment Temperature Range - 25 to +45 Deg C

Humidity Range <95%

Enclosure IP30

Dimensions 228mm x 164mm x 55mm

Power Terminals 6AWH (12mm sq)

Weight 1.2Kg

Solar Panels to Controller Cable -

2 X single core 6mm2 solar PV Cable, TUV Approved

Solar controller to Battery Cable -

2 X single core 4mm2 solar PV Cable, with 30A inline fuse and 8mm ring terminals TUV Approved.

All cabling carefully designed to minimise voltage drops and maintain maximum system efficiency.

Solar Brackets -

Aluminium

Light weight

100mm long

Supplied as 4 brackets per panel

Y Branch -

Male Male Female & Female Female Male connectors

1000V DC or 30A max

4mm2 solar Cable

IP66 waterproof

Important information regarding Charge Controllers - MPPT

Warning: The Connection Order Below must be followed

1. Battery Cable 2. Load Cable 3. Solar Panel Cable

Do not install the charge controller in a sealed enclosure where battery gases can accumulate.

Tracer AN Series – product features -

Advanced maximum Power point tracking (MPPT) technology, with efficiency no less than 99.5% with 10-30% more power to the battery than cheaper PWM controllers.

High quality components with maximum conversion efficiency of 98%

Ultra fast tracking speed and guaranteed tracking efficiency

Reliable automatic limit function of maximum PV input power, ensuring no overload risk.

Wide maximum PowerPoint operating voltage range

12/24V DC automatic battery detection

LCD panel display providing operating data and working conditions

Supports 3 pre-programmed charging options, sealed, gel and flooded batteries

Battery temperature compensation function

Includes RS-485 communication bus interface and mod bus communication protocol

RS-485 plug socket port can be used for PC monitoring via USB connection, this socket can also be used for connecting the MT50 external display unit to show real-time data and parameter settings.

Remote temperature sensor connection port, to remotely detect battery temperature allowing and MPPT technology to adjust parameters.

The controller has a three stage battery charging algorithm (bulk charging, constant charging and flow charging) for rapid, efficient and safe battery charging.