NVR system (Network Video Recorder) that integrates control and recording unit. The NVR system uses video cameras based on IP technology. The communication with the video cameras and the control unit is done using UTP cable or an ethernet network already installed. Ideal for a CCTV video surveillance installation. It has PoE (Power over Ethernet) technology, which allows the transmission of data and power por the UTP cable. Easy installation and connection of the video cameras to the control unit, by means of a single UTP cable.
Full NVR (Network Video Recorder) that allows the communication of the video cameras and the central unit, using a network installation.
Ideal for CCTV surveillance video.
Supported I/O resolution and recording: 16 channels at 720p.
Allows you to install a 3.5 "SATA hard drive inside (hard drive not included).
Recording the images cyclically, on the hard disk.
PoE technology for the connection of video cameras. The connection to the cameras is made with UTP cable. Data and power are transmitted through the UTP cable.
ON/OFF switch and LED status indicators.
Control through integrated softwareon the device itself. It works autonomously connected to a monitor (VGA or HDMI).
Possibility of connection LAN (local), WAN (remote) and USB. For access to recordings and real-time viewing.
Access through APP for BlackBerry, Android and iOS (APP not included, must be downloaded).
H.264 data compression.
Mounted in black metal casing.
Size: 350 x 240 x 70 mm.
1 female RJ45 port for LAN connection and video cameras connected to the TCP/IP network.
1 USB port A-female for the mouse connection, for the control of the device. Mouse is supplied.
1 USB A-female port for connection of the central unit with a computer, for access to the recordings.
1 female HDMI port for connecting a breadTV size or monitor, for viewing the images.
1 female VGA port for connecting a monitor, for viewing the images.
1 RCA-female connector for the connection of the general analog audio input.
1 RCA-female connector for the connection of the general analog audio output.
1 DC-jack for the power supply. Includes 12VDC (2A) power supply.
1 2-pin terminal for the RS485 control connection.