Safe and easy to use: No crimping is required, just put the peeled wire into the solder sleeve and heat to complete the connection. Transparent sleeves allow for precise inspection; specific sizes for specific yarns, specific colors.
Waterproofing and insulation: Double wall design, polyolefin tubing outside and hot melt adhesive inside. Ensures perfect insulation and water resistance, and prevents wire corrosion, even in humid environments.
Product material: High quality tin, low melting point, easy to use. High quality: meets all relevant European standards.
Widely used: Applications in automotive, rail, marine, aerospace, electrical and electronics, household and even science projects.
Product Specifications: White connector, diameter 1.7 mm, cable cross-section 0.25-0.34 mm² (AWG: 26-24)
Steps of use:
1: Select the correct size connector, screw the connector onto a wire and twist the two conductors together. Make sure the ends of the bare wires are clean and tidy (shiny).
2: Move the connector to the middle of the conductor. Be sure to strip the ends of the wires long enough so that they overlap and stay within the solder sleeve area.
3: Use a heat gun or lighter to heat the cable sleeve until the solder ring melts and the adhesive shrinks in size, filling the space in the terminal until its wire melts .
No crimping required
Suitable for hard to reach or space constrained wiring solutions. Because these wire-bond connectors do not require crimping, you can easily use them in hard-to-reach or space-limited environments
Note: This does not include other things, color is based on the first picture and other pictures only show the effect
Due to the differences between different monitors, the picture may not reflect the actual color of the item.
Due to manual measurement. Please allow deviation. Thanks!