Böhmer-AG 5000K-E Power to the People
When it comes to efficiency, Böhmer-AG are globally recognised as the go-to generator manufacturer. Decades of specialist generator design has been used to create this extensive, energy conscious range boasting advanced safety features. With Böhmer-AG you can get prepared, to be prepared.
- 7500W Startup / 5000W Constant Output
- 12 Hours (max) Run Time on a Single Tank of Fuel
- Two AC 240V UK 3 Pin Plugs and 12V DC Output
- 25 Litre Fuel Tank
- 13HP 4 Stroke OHV Engine
- Dual Electric Key Start & Gen-III Recoil Start
- 78dB Rated Noise Level
- Dimensions 692mm x 522mm x 545mm / Weight 85kg
Böhmer-AG 5000K-E Green by Nature
The WX5000K-e has been designed with you and the planet in mind. The fuel efficient Böhmer-AG copper wound motor gives unparalleled performance whilst reducing emissions. Intelligent power management reacts to your needs, only producing what's needed when you need it by automatically adjusting the engine revs to match the current draw. All Day Energy
Getting started is quick and simple using the electric key start. With a massive 7500W of power delivered over dual 240V outlets and the 12V DC, carefully managed to provide full power on demand. Fill and forget with a substantial 12 hour continuous run time (a typical working day) from a single tank of fuel. A Brand You Can Trust
With expert support from Bohmer-AG qualified staff, we have your back should you have any questions.
Quality Where it Counts
The durable frame
protects and houses a powerful 400cc 13HP Air Cooled OHV Böhmer-AG engine. The front panel has been designed with clear controls
and the whole unit has a highly portable design for ease of use.
The advanced overload detection
system will automatically shut down the power output whilst keeping the engine running in the event of a power overload. The low oil protection
system will automatically protect your engine by cutting out the engine if your oil level is too low. This intelligent generator allows you to run multiple appliances simultaneously, with confidence
. Also, the high quality copper wound motor is designed to last unlike the cheap aluminium wound motors that most generators rely on.
It's so easy to get started with your Böhmer-AG generator. Just add oil and fuel, turn the switch on and then pull the Gen-III quick start recoil mechanism. These are designed to be easy to start
with minimal fuss.
Choosing the Correct Generator Working Out Wattage Requirements
For each appliance, identify how many watts it requires and then add 20% for resistive loads or add 50% for inductive loads. Identifying Load Types
Resistive loads have no moving parts (e.g. kettles, light bulbs and heaters). Inductive loads have moving parts (e.g. motors, air compressors and pressure washers). Examples
1000W heater - 1200W generator
2000W pressure washer - 3000W generator
500W kettle and a 3000W motor - 5100W generator
- 1 x Fitting Nuts & Bolts
- 2 x 12v DC Clamps
- 2 x Rubber Feet & Mounts
- 2 x Wheels & Axles
- 2 x Handles
- 2 x UK Plugs
- 1 x Spark Plug Tool
- 1 x instruction manual / key