DeWALT DCK2046P2 18V XR CORDLESS BRUSHLESS Nailers DCN692 + DCN660 Twin Pack With 2x5.0Ah Batts And Charger In 24" Bag

1 x DCN692  1 x DCN660  2 x 5.0Ah XR  1 x DCB115  2 x No Mark Tips (DCN692) 1 x Large Canvas Carry Bag with Shoulder Strap

DCN692 + DCN660 TWIN PACK

The DCK2046P2 (replaces DCK264P2-GB) is a great value kit including the DCN692 First Fix Framing Nailer and the DCN660 Second Fix Finishing Nailer. Be prepared for the whole job with just the single carry bag, with room to store both nailers, both 5.0Ah batteries and the improved DCB115 quick charger - plus acccessories!

DCN692 Features:

• Two speeds or power levels which optimises the nailer for firing all lengths of nails.
• The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
• Mechanical rather than gas operation offers consistent performance at temperature between -20 and 50 degrees celsius and minimal cleaning/service requirements
• Class leading vibration and sound figures, offer fantastic user protection
• Versatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
• Reversible belt/rafter hook provides increased portability and versatility on the job-site
• Depths can be easily adjusted using the thumb wheel depth adjuster Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
• Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
• Gas free operation offers a significant saving in running costs
• Tool free stall/jam clearance minimises user down time
• Cordless design so no hanging leads to deal with
• User can engage contact trip lock-off and prevent accidental dis-charge of fastener
• Dry fire lockout ensures that the tool is protected from firing without nails in the magazine

Specifications:

• Compatible Battery Chemistry: XR Li-Ion
• Voltage: 18v
• Nail Diameter: 2.8 - 3.3 mm
• Magazine angle: 30 - 34 °
• Magazine loading: Rear - load
• Nail Length (Plain Shank): 50 - 75 mm
• Magazine capacity: Up to 55 Nails
• Trigger Type: Bump & Sequential
• Length: 345 mm
• Width: 125 mm
• Height: 338 mm
• Weight: 4.1 kg
• Nailer Operating Mode: Selective
• Integrated Belt Hook: Yes
• Jam Clearing: Yes
• Impact energy: 105 J
• Temperature Range: -20 to 50°C
• Fault indicator: Yes

DCN660 Features:

• Benefit from longer runtime, quicker readiness to fire and less recoil
• Brushless motor technology offers the power to fire a 63mm nail into soft wood and 50mm nail into hard wood
• Tool free stall/jam clearance minimises user down time
• Mechanical rather than gas operation offers significant cost savings as well as consistent performance at temperatures between -20 and 50 degrees celcius and minimal cleaning /service requirements
• Protective pads to lay tool down on head
• Durable magazine accepts 32 to 63mm 16Ga nails
• Mode selector allows for bump or sequential nailing
• LED lights with error notification
• Easy tool-free clearing of jams and stall release
• Easy depth adjustment with easy to read gauge

Specifications:

• Nail Diameter: 1.6 (16Ga) mm
• Magazine angle: 20 °
• Magazine loading: Rear
• Nail Length: 32 - 63 mm
• Magazine capacity: 110 Nails
• Trigger Type: Bump & Sequential
• Length: 310 mm
• Width: 95 mm
• Height: 305 mm
• Weight: 2.7 kg
• Nailer Operating Mode: Bump and Sequential
• Jam Clearing: Tool free
• Temperature Range: -20 to 50°C

Included:

1x DCN692 1st Fix Framing Nailer Type 3 1x DCN660 2nd Fix Finishing Nailer 2x 5.0Ah XR Slide Batteries 1x DCB115 Multi Voltage Compact Charger 1x Reversible Belt Hook (DCN692) 2x No Mark Tips (DCN692) 1x Large Canvas Carry Bag with Shoulder Strap