Exclusive app offer: free delivery on orders over £200*Terms & conditions apply
Who are we

Everbuild Everflex 125 One Hour Decorators Caulk Brown C3 Size Pack of 25

Product out of stock
Secure Payment
Good to know
Return within 14 days
Product details
  • Colour
  • Silicon
  • productRef
  • manufacturerSKU
EVERFLEX ONE HOUR CAULK is a fast drying flexible decorators filler and sealant which can be overpainted with all paint types, or covered over with wallpaper. No sanding down is required.

Fast drying - can be over-painted in 1 hour.
Permanently flexible.
Easy water clean up.
Excellent slump resistance.
Certified to the harmonized European standard EN15651 for facade use internally in compliance with the Construction Product Regulation.

Areas For Use
For sealing and filling cracks and gaps prior to decorating.
For use around skirting boards, ceiling cornices, window and door frames, stair treads and risings and fixtures adjoining walls.
Can be used to fill damage plaster.

Not for use in conjunction with bitumen or asphalt.
Do not attempt to abrade when cured.
Do not over-paint until a surface skin has formed.
Note: this product is a flexible. Certain poor quality paints (especially certain vinyl matts) have very little movement in the dry film. It is possible for the dry paint film to crack if movement is excessive.
For internal use only

Surface Preparation
All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Highly porous substrates such as new plaster should first be primed with a dilution of Caulk with water at a ratio of 1:2. Can be applied to slightly damp surfaces.

Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45 with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed. Smooth down within 20 minutes of application using a wet spatula, piece of wood or wet finger. Care should be taken at this point not to saturate the surface as this will delay drying. Any excess sealant etc., can be removed using a sponge and warm water. Can be over-painted after @ 1 hour.

Questions & answers

All you need to know about this product from our experts
You are here:
  • Millions of products

  • Delivery to your home or click & collect

  • Hundreds of dedicated experts online