Hillman Lithium batteries are an excellent and affordable upgrade for most golf buggy's they are supplied with a specialised charger and a lead to connect to the buggy controller.
These high-quality battery packs are supplied in a rugged shockproof metal casing that will keep the sophisticated internal electronics safe for many years.
The power connection is integrated and the dual function display shows the Voltage and Capacity with an easy to operate push button.
The casing has an integrated charging port fitted you can charge the battery anywhere transporting the battery is a breeze as incredibly the weight has been kept under 7kg there are also two thick handles that store flat and are easy to grab even with gloves on.
The 33Ah battery amazingly can last around 27 holes depending on terrain and conditions.
Hillman Lithium batteries have been designed to be as easy as possible to fit remove and charge off the buggy.
The amazing weight savings of having a single 24V Lithium battery instead of two heavy 12V Lead-Acid batteries will reduce the load on the motor and other parts which will in turn increase their life span.
The range of the battery will vary depending on your buggy terrain and the conditions.
IMPORTANT; Larger buggies (over 1000W motor) will not get the stated 18 holes range from the battery please contact us if you do not have a Hillman buggy to confirm if this battery is suitable for your needs.
All Hillman Lithium Battery Kits are supplied with a connection lead to connect the battery to the buggy this is essential if you are upgrading from two 12V Lead Acid batteries. And a specialised Lithium Battery Charger to ensure you get the best from the battery.
|Normal Voltage ||25.2V|
|Rated Capacity ||33.0Ah(C5)|
|Min Capacity ||30.2Ah(C5)|
|Energy ||About 831.6 Wh|
|Internal Resistance ||≤60mΩ|
|Size ||(230± 3） mm *(156± 3） mm *(170± 3） mm|
|weight ||6.6± 0.2kg|
|Shell material ||lron|
|Charge Voltage ||29.05-29.4V|
|Standard Cutoff Voltage ||about 21V|
|Charge Current ||≤5A|
|Charging cut-off current ||312mA~624mA|
|Normal Discharge Current ||≤30A|
|Over charge protection Over discharge protection Temperature protection Balanced function|
|Charge Connector ||XLR(1+ 2- 3N)|
|Discharge Connector ||50A gray Anderson|
|Electricity Display Board ||SOC|
|Charge Retention ||After charging according to standard 3.2 placing the battery for 28 days under the standard test|
conditions then discharge it under standard 3.3 and the charge retention rate is ≥80%.
|Cycle time ||The cycle life is not less than1000 the capacity retention rate is ≥70%. (Charging according to|
3.2 standard leaving 0.5~1h; discharging according to 3.3 standard leaving 0.5~1h counting 1