Makita DHR202Z Hammer Drill
Makita DTD152Z Impact Driver
Makita DBO180Z Sander
Makita DJR186Z Reciprocating Saw
Makita DKP180Z Planer
Makita DJV180Z Jigsaw
Makita DHP458Z Combi Drill
Makita DGA452Z Angle Grinder
Makita DTW300Z Impact Wrench
Makita DMR110 Radio
3-Mode Switch for rotation only, hammering with rotation, or hammering only
2x Faster drilling with synchronized RPM and BPM for more efficient drilling
Built-in torque limiter clutch disengages if bit jams when hitting rebar
Chisel rotates 360° with 40 different positions to get the best working
Ergonomic shape fits like a glove with even pressure and easy control
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
Electric brake
Forward/reverse rotation
Job light
Rotary hammer action
Rotary only action
Variable speed trigger
Electric brake
Variable speed control trigger
Forward/reverse rotation
Twin LED job light
High rotation speed
One-touch bit installation
Ergonomically designed soft grip handle
Compact overall length of 137mm
Lightweight design
Battery protection circuit
Belt clip
Simple to operate electronic push button switch with 3-speed settings
Connectable to dust extractor
Compact design with short height and lower centre of gravity for better manoeuvrability
Tool-less blade change
Trigger switch with lock-off lever
Electric brake
Variable speed
Ergonomically designed handle
New designed crank mechanism for higher efficiency
High power
Planes a width of 82mm (3¼") in a single pass.
Fitted with a comfortable operator handle.
Easy to use adjustable depth settings.
A precision machined aluminum base allows for planning accuracy and the cutter head makes 14000 cuts per minute for fast stock removal.
The lock -on button gives the operator the option of continuous operation.
Left and right handed use due to the buttons on either side of the handle.
Dust extraction port on the side.
Adjustable up to a 2mm depth of cut.
Shoe on the underside stops accidental laying down of planer while blade is still moving.
Rebates to a maximum depth of 9mm.
22 minute charge time with the air cooled Makstar Optimum Charging System.
Lithium -ion batteries have greater life spans than their Ni -MH or Ni -Cad counterparts giving 430% greater run time.
Lithium -ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni -MH battery.
Ergonomically rubberized handle provides comfortable gripping and more control while minimizing hand fatigue and pain.
The large 2 finger variable speed trigger makes this jigsaw easy to operate even with gloves on.
3 Orbital settings + straight cut.
Blower will clear the pencil line of dust.
Lightweight and compact.
Tool-less blade change - push in lock system enables very fast blade changes.
LED light will illuminate your cut line.
Smooth and powerful cutting at the high stroke speed at 2,600 spm.
Double insulated.
Soft start.
Enhanced dust and drip-proof performance for use in outdoor applications or harsh environments.
Single sleeve keyless chuck allows for easy bit installation/removal by one hand.
Twin LED Job light with pre-glow and afterglow functions.
Higher power and productivity.
Ergonomic design for fatigue free use.
21 Torque settings in clutch mode.
Electric brake
Variable speed control trigger
Equipped with battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current
Forward and reverse trigger
LED job light
Ergonomic soft grip
Electric brake
Variable speed control by trigger
Forward / reverse rotation
LED job light
Brushless motor
Electronic 4 stage impact power selection
Trigger switch with full speed mode: Variable speed mode can be changed to full speed mode simply by pushing a button. Because in full speed mode the trigger travel is shorter , the full speed is reached faster.
Auto-stop system available both in forward/reverse rotation modes
Capable of receiving DAB/DAB+ Radio Stations
Dual power source: AC or Makita batteries.
Flexible antenna can be removed and stored inside the radio.
Soft grip carry handle swivels 90 degrees
2 speaker stereo system.
Elastomer bumpers protect against rough handling on a jobsite
Equipped with Micro USB port for software upgrade.
AUX-IN jack for connecting to external audio source (Connecting cable is not included.)
AC adaptor jack
IP64 rated dust and shower-proof construction
Easy-to-read digital tuner with LCD display
Compatible with all Makita 7.2V Li-ion, CXT and LXT batteries.
2 x DC18RC Charger
4 x 5.0Ah BL1850 Batteries
2 x 832367-6 Duffle Tool Bag with Wheels
Lock Nut Wrench
Side Handle
Abrasive Wheel
1 x AC Power Adaptor
Barcode: 0088381658119
Voltage: 18V
Shank Type: SDS+ Plus
Capacity in Concrete: 20mm
Capacity in Steel: 13mm
Capacity in Wood: 26mm
Impacts Per Minute: 0-4,000 ipm
Impact Energy: 2.0 J
No Load Speed: 0-1,100 rpm
Overall Length: 358 mm
NOISE & VIBRATION:
Vibration: Drilling: 3 m/sec²
Vibration: Chiselling: 11 m/sec²
Vibration: Hammer Drilling: 145 m/sec²
Vibration K Factor: 15 m/sec²
Noise Sound Pressure: 87 dB(A)
Noise Sound Power: 98 dB(A)
Noise K Factor: 3 dB(A)
Barcode: 0088381699099
Battery Type: Li-ion
Voltage: 18V
Driving Shank: 6.35mm (1/4" Hex)
Machine Screw: M4-M8
Standard Bolt: M5-M16
High Tensile Bolt: M5-M12
Coarse Thread: 22-125mm
Impacts Per Minute: 0-3500 ipm
No Load Speed: 0-2900 rpm
Max Tightening Torque: 165Nm
Sound Pressure: 93 dB(A)
Sound Power: 104 dB(A)
Sound K Factor: 3 dB(A)
Vibration: 10.5 m/s²
Vibration K Factor: 1.5 m/s²
Barcode: 0088381658584
Voltage: 18V
Orbits Per Minute: 7000/9500/11000 opm
Orbit Diameter: 2.8 mm
Battery Type: Lithium-ion
Sanding Stroke Per Minute: 14000/19000/22000 spm
Speed Control: 3 Stage Push Button
Charging Time: 22 min
Pad Brake: Yes
Paper Fastening: Hook & Loop
Pad Size: 123 mm
Paper Size: 125 mm
Maximum Output: 190W
Barcode: 0088381806640
Battery Type: Lithium-ion
Body Only Machine: Yes
Voltage: 18 V
Capacity in Wood: 255 mm
Capacity in Mild Steel Pipe: 130 mm
Strokes Per Minute: 0 - 2,800 spm
Stroke Length: 32 mm
Noise Sound Pressure: 84 dB(A)
Noise Sound Power: 95 dB(A)
Noise K Factor: 3 dB(A)
Vibration K Factor: 1.5 m/sec²
Vibration: Cutting Wood - 12.5 m/sec²
Vibration: Cutting Chipboard - 13.0 m/sec²
Barcode: 00088381662635
Planing Width: 82mm - 3¼"
Planing Depth: 2mm
Max Rebate Depth: 9mm
Battery Type: Li -ion
Charging Time: 22 min
No Load Speed: 14000rpm
Barcode: 0088381662710
Voltage: 18V
Max in Steel: 10mm
Max in Wood: 135mm
Strokes Per Minute: 0-2600 spm
Stroke Length: 26mm
Noise Sound Pressure: 78 dB(A)
Noise K Factor: 3 dB(A)
Vibration K Factor: 1.5 m/sec²
Vibration Cutting Chipboard: 8 m/sec²
Vibration Cutting Sheet Metal: 3.5 m/sec²
Barcode: 0088381653831
Voltage: 18V
Max. in Wood: 65mm
Max. in Masonry: 16mm
Max. in Steel: 13mm
Max Torque S/H - 58 / 91 Nm
Torque Settings: 21 + drill
Vibration: Drilling - 9.5 m/sec²
Vibration K Factor - 1.5 m/sec²
Body Only Machine
Electric Brake
Variable Speed Control: Trigger
Blows Per Minute: 0-30000/6000 bpm
No Load Speed: 0-2000/400 rpm
Barcode: 0088381660112
Grinding Wheel: 4-1/2" / 115mm
Max Wheel Diameter: 4-1/2" 115mm
No Load RPM: 10,000
Watt Hours: 54.0
Overall Length: 12-1/2"
Barcode: 0088381898003
Voltage: 18V
Driving Shank: ½” Square Drive
Standard Bolt: M10 – M20
High Strength Bolt: M10 – M16
Impact Power Selection: Max, Hi, Med, Soft
Impacts Per Minute: 0 - 4,000/ 3,400/ 2,600/ 1,800 ipm
No Load Speed: 0 - 3,200/ 2,600/ 1,800/ 1,000 rpm
Max Fastening Torque: 330 Nm
Nut Busting Torque: 580Nm
Net Weight: 1.5 – 1.8kg
Vibration: 12.5m/s²
Vibration K Factor: 1.5m/s²
Sound Pressure Level: 97 dB(A)
Sound Power Level: 108 dB(A)
Sound K Factor: 3 dB(A)
Barcode: 0088381827898
Battery Type: Lithium-ion
Battery Range: 7.2 - 18V
Speakers: 2x 76mmØ (8Ω)
Practical Output (7.2v): 0.5W x 2
Practical Output (10.8v): 1.2W x 2
Practical Output (14.4v): 2.2W x 2
Practical Output (18v): 3.5W x 2
Frequency Range DAB: Band III 5A – 13F
FM Coverage: 87.5 - 108 Mhz
**images for illustrative purposes only – please refer to description and specification for full details of product**