- Product Overview: With a standard claw (adjustable width) can be used for the adapter tripod off Flash camera and any other aluminum alloy treatment. The surface is sprayed with plastic, which is durable and wear resistant. There is a setting button on the side. Used to fix lamps and lanterns, cheap and good quality. The bottom is a 1/4 port, which can be connected to a tripod, and the flash can be mounted on the top.
- The elastic button can be easily installed and the base can adjust the width, and the width can be adjusted freely according to the different models of flash. It is convenient, portable and fast
- The hot dual design hole universal design shoe adopts a double thread design, which represents all 1/4 of the universal standard specification. The top can be connected to a flashlight and the bottom can be connected to a tripod lamp holder.
- Flash claw socket on the camera connector for flash claw with standard screw hole 1/4 Under the socket for flash claw
- Used for fixing the lamps, good market and good quality. The bottom is a 1/4 port, which can be mounted on a tripod, and a flash can be mounted on it.
- All metal claw support for the base of the flash [The bottom of the bracket is equipped with a 1/4 screw interface
- The design of the groove at Middle can actually avoid damaging flash contact. It is more convenient to switch the flash on the lamp holder or the luminaire! Adjustable small spring tightening design In the groove, adjust the sealing more smoothly, can be connected to most flashing except the Sony interface
- Product Name: hot and cold flash shoe holder
- material: aluminum alloy
- size: 4 * 1.7 * 1.7 cm
- Product Type: Tripod / Head
- Applicable: General
- Maximum load: Less than 2 kg
- Quantity: 1
- Net weight: 20g
- Threaded interface: General standard specification 1/4
*Free shipping availability will depend on your postcode, this information will be available at checkout.