REF BETGB008850ME35555113

Set of 12 stainless steel stainless steel cable clamps for 4mm metal cable diameter (M4)

In stock
In stock
£11.83
£8.76
-
25%
£8.76
£11.83
-
25%
total
£8.76
Secure Payment
Delivery options
Home
  • At home between 08/12/2021 and 21/12/2021 for any order placed before 6 pm
Sold by Betterlife
 
 
 
 
 
 
 
 
 
 
 
 
Product details
Description

Designed for coupling two cable lengths, or to form an eye or loop on a cable. This is the best way to secure cables and ropes.

Made of polished stainless steel 304, without burr, durable, rust-resistant and corrosion, can be installed in the Outdoor equipment.

consists of a U-shaped bolt, forged saddle and two nuts. The two cable layers are placed in the U and tightened bolt in place for a waterproof connection. Non-slip threads in the center of the seat effectively increase friction.

Large application in fixed patio or veranda furniture, suspended shading veils, hanging patio garlands, suspended floating ceilings, The safety pipes, the anchor columns, the fencing barriers, the linen strings, the suspended streamers, the anchoring and fitness equipment, etc.

for a secure connection, be careful. to use the correct number of clips. 3 clips at each end are recommended so that the ends of the cable do not slide.

Robust rope handles

Many uses: hang sails, suspend floating ceilings, pipes from Security, anchoring poles, fence barriers, linen lines, banners, gym equipment, etc.

Features:

Material: Stainless steel 304.

Color: Silver.

Surface: Polished.

The correct way to fix the cable clips is as follows:

1. Apply the 1st clip a basic width from the end of the metal rope. The base or saddle must wear on the living end of the rope - U-bolt at the short end. Tighten the nuts

2 firmly. Attach the second clip as close as possible to the loop. Tighten the nuts but not firmly.

3. Attach the balance of the clips also spaced between the first two clips. Tighten all nuts completely. Apply initial load inspection nuts and remove.

Tips:

1. Tighten the nut with a sleeve / nut. Drills can be used, but make sure you do not tighten because the wires can bend.

2. Be sure to fold a minimum of 7.6 cm and 1.9 cm thread.

3. Do not use plastic covered cable.

4. Do not install the stool on the ends of the cable. The dead ends of the cable only U, broken bolts will not affect the breaking strength of the lifting wire.

5. Do not reuse clips.

6. Inspect all the clips periodically

Content:

12 m4 cable clips in U.

Do you need more information?

We're here to help!
You are here:

The biggest marketplace in Europe for DIY, Home & Garden

  • Millions of products

    Loads more than in a shop, and without needing to navigate all the aisles

  • Delivery to your home or click & collect

    Whichever suits you best

  • Hundreds of dedicated experts online

    Like Macgyver but online