Get up to £120 off now with code DIYWEEK-120! - Terms & conditions apply
Who are we

Solar Thermal Water Heater Mat 0.66m x 1.5m , Pump and Solar Panel Kit

Product out of stock
Secure Payment
Good to know
Return within 14 days
Product details
  • productRef
  • manufacturerSKU

Totally Free Energy Free sun powered heating and free sun powered electricity for the pump.

Keep those dangerous extension leads and mains powered electricity well away from the water. Safe solar panel output voltage.

Kit Contents - 

3 X EPDM/ NBR tough rubber mat, UPVC resistant, dimensions 66 cm wide, 150 cm long with manifold pipes. (additional mats can be purchased from us separately)

1 X Lowenergie 30W Solar Electricity Panel, 18 volt DC output, 1.12A, 20w(55x45x2.5cm), connects directly to the pump

1pc 12-24v Solar Water pump with 32mm (1.25 inch) pool pipe connectors, 420 Litres per hour circulation rate through the Solar collector which is sufficient.

2pcs, water intake & output pipe connections which will fit a standard 32mm pool hose

6 pcs, metal jubilee clips to ensure tight pipe connections

1 Roll PTFE Tape for enabling good watertight pipe connections

6pcs spare rubber gaskets

Pool Hose - 4m length (colour may vary)

1pc, detailed 12 page user manual which also gives advice on expansion kits and larger solar pool heating applications.

Calculation Example (Children's Play Pools) :Circular pool, 8 foot diameter (2.44M diameter). pool diameter X pool diameter X average depth X 0.79 1. Calculate your pool water volume i.e. 2.44M x 2.44M x 0.5m in depth X 0.79 = Pool volume 2.35m3 (0.79 corrects water volume for the round pool) 2. Recommended minimum panel coverage is 75% = 1.76 m2. 3. So two 1m² solar collectors are recommended, or you can oversize the solar collectors to compensate for occasional cloudy conditions.

Questions & answers

All you need to know about this product from our experts
You are here: