Power supply voltage 220 (V)
Power 60-100 (W)
Air source air
Spindle time adjustment 10-15 (s)
Pap frequency 60 (Times / min)
Minimum discharge volume 11 (ml)
Instructions for the use of the Glue gun
1. Glue leak problem
When the glue has just finished, there is an excess glue inside and the pressure was not released. It is normal there is a Small flight under the action of inertia.
2, pour a glue problem
during the preheating period, the solid glue has not melted in the liquid state. At this point, pressing with force on the trigger may cause glue overflow.
3. Paste Renewal Problem
When the glue stick is almost exhausted, simply insert a new glue stick into the glue stick sleeve and connect it to the original sticker stick to continue using it. The glue sticks that are not used for work can not be removed and left in the gun to continue using it next time.
4. Powering problem
It is generally recommended to warm up for about 3 minutes and turn off the unit when not in use.
5 ways to eliminate the hot melt glue
1. Remove the thermofusible adhesive with alcohol
It is recommended to choose anhydrous medical alcohol, to deposit the medical alcohol on the thermofusible adhesive or to use a small cotton swab soaked alcohol and apply it on the hot melt adhesive. Once the thermofusible adhesive hardened, it can be easily removed.
2. FENGYOU fine glue
Put the oil from air on the hot melt adhesive repeatedly and let the thermofusive adhesive dissolve slowly. This method will be slower, but it is respectful of the environment. 3. Method of damping ice bags
That the hot melt glue is glued on clothes or tables and chairs, you can take a small ice bag and apply it, wait a few minutes, then the Remove gently with your nails.
4. Needle injection method
Pull the needle into anhydrous medical alcohol and injected it into the hot melt adhesive. This method not only saves alcohol, but also completely eliminate the thermofusive adhesive in the corner.
5. Method of frozen tamance
If it is a small article with thermofusible glue, put the article in the refrigerator to freeze, or take a glaconic and place it on top of The article, then it can be easily removed.