NOTE: Custom-made products are generally excluded from return or exchange.
Article no.: 17857-SA
Collection: PUNCH 3D
Backing material: HIPS (high impact polystyrene) with an A-PET background foil
Surface material: printed surface, 100% PVC-free
Pattern: metal look
Installation: The back of the panel is self-adhesive.
Drilling: The panels can be drilled from the decorative side.
Printability: The surface is suitable for digital printing.
Abrasion resistance: very good abrasion resistance
Suitability for wetrooms: limited suitability for wetrooms – the material is sensitive to splashing water
Temperature stability: temperature resistant up to 50 °C (122 °F)
Cutting: sheets with less than 2 mm thickness can be easily cut with a box cutter
Shipping: rolled packable - panels (adhesive side outwards) are shipped in a cardboard box
Dimensions (mm): 2600 x 1000 x 1.3
Manufacturing country / region: Austria
Suitable for: all living areas (living room, bedroom, kitchen, bathroom, etc.)
Basic colour: grey
1st pattern colour: silver
Look: metallic accents
Model no.: Punch 3D Collection | 17857-SA
Product type: Decor panel
Collection: PUNCH 3D
Surface area (m2): 2.6
WallFace sheet self-adhesive with punch perforated 3D plastic surface
Backing material: HIPS-plate (high impact polystyrene) with A-PET background foil
Upper: metallized / printed polyester foil surface, 100% PVC-free
Welcome to the exclusive WallFace wall panels. Beautiful Living for DIY!
Are you looking for a luxurious interior - eye-catcher or for exclusive wallcoverings for representative rooms? You want material that is easy to handle, with no special tools and adhesives?
Then our self-adhesive decorative WallFace panels are the perfect way to give your walls in a few minutes a distinctive "face" - WallFace.
Only one strip of our self-adhesive WallFace wall panels can set special accents.
With a large range of decorative panels, which can be installed as easily as self-adhesive wallpaper, WallFace panels will enable you to realize exceptional ideas for beautiful walls in your home. In no time you have a nice eye-catcher for the interior design of your business, your restaurant or your bar. Also as eye catching decoration in shop windows or in interior shop fitting our WallFace wall panels are eminently suited. By creative use you can not only dress up walls, but also embellish very simply and efficiently your furniture, doors, fridges, tiles, trays, baskets, etc..
The different sizes, profiles and textures give a special touch to any surface.
With Punch 3D Collection of WallFace we offer design sheets with stamped, embossed relief and special varnished surfaces. The exclusive design sheets in metal optics convince with their realistic feel and quality finish. Design sheets from the Punch 3D Collection of WallFace draw instantly all eyes in every room.
Easy clean surface, dirt-resistant, good abrasion resistance, good moisture proof, high temperature resistance up to 50° C, bendable / low weight / self adhesive / easy to cut, packable rolled up. Suitable for all non absorbent surfaces. When moving, you can carefully disconnect the panels from the wall, and reinstall it in your new home using a commercially available silicone adhesive.
WallFace wall panels save time and money. These wallcoverings bond immediately, require no drying time, and are easily to hang.
The substrate should be clean, dry, free of dust and dirt. With strongly absorbing substrates (eg masonry) an undercoating with wallpaper primer or all over primer is recommended. With a carpet knife cut the desired shape / length of the surface. Pull off adhesive cover step-by-step and press the panel on the wall with a medium hard rubber roller / wallpaper seam roller. Meanwhile avoid air pockets or bubbles.
Commercial customers may request special conditions for bulk buying by e-mail. For orders of minimum 3 panels, these panels can be furnished upon request without self-adhesive and at an additional cost with magnetic backing.