1/2-inch Brass Electric Water Heater Boiler Valves for Heating Systems

Made of brass, it has a high density, is strong and durable, and has high resistance to mechanical damage and wear.

These valves can be used in houses and apartments, as well as in most commercial settings in fields such as industry, plumbing, and heating.

Our brass valves function as both check valves and pressure relief valves. As a check valve, it prevents hot water from flowing back from the boiler into the cold water supply.

The dimensions are a 1.27 cm male thread and a 1.27 cm female thread.

Brass valves automatically release excess pressure from the water heater. If, however, the pressure in the boiler rises above the set value during water heating for any reason, the water heater's pressure relief valves will release the required water, causing serious disturbances and dangerous overpressure. Specifications: Material: Brass. Maximum pressure: 0.7 MPa/0.75 MPa/0.8 MPa/0.85 MPa/0.9 MPa (optional). Operating temperature: -20°C ≤ T ≤ 110°C. Dimensions: 1/2" external thread and 1/2" internal thread. Length: Approximately 44 mm. Package contents: 1 pressure relief valve. Note: Due to manual measurement, the dimensions may vary by 1-2 cm. Please only order if you accept this margin of error. The item's color may vary from the photo, depending on your computer's display and brightness settings.