1/4" BSP 12V Brass Electric Solenoid Valve with Barbed Connector, Suitable for Water, Air, Fuel, Gas Closed

Normally closed water valve, open when the power is on and closed when the power is off. The valve body is made of brass, strong and leak-proof, with better stability. Suitable for flow control, liquids and gases, with automatic protection function. With clear parameters on the nameplate, the valve can be used according to the rated standard. You can choose between different voltages and specifications to meet different connection requirements. The faucet body is made of brass with clear, deep threads that will not slip during rotation and are corrosion resistant. The nameplate indicates detailed parameters for safe use of the solenoid valve within the specified parameters. The enameled copper wire coil has a longer lifespan and saves time with efficient operation.Wrap the wires with tape to improve the seal. Material: brass Voltage: 12V/24V/110V/220V Operating temperature: -5-80°C Pressure range: 0-1 MPA It is applicable in many fields: irrigation control (garden, farm, etc.), liquid control (pipelines, artificial flow, etc.) and air control (laboratory, factory, etc.). The faucet body cannot be installed vertically. Ensure that there are no impurities or dirt in the piping. If impurities enter the valve body, they will affect its normal operation. Follow the arrows on the valve body to install the fluid direction. After making the connection, check that the wiring is secure; a loose cable will cause the solenoid valve to fail. Wrap crude tape around the threads for a better seal.Product advantage: Product parameters: Precautionary measures during installation