1/8", 3/16", 1/4" Tube Bender - Bending Tool for Fuel, Brake, and Air Conditioning Refrigerant Lines (Blue)

Features:1.Can be bent without shaking or collapsing; the bender's calibration mark indicates a bend angle from 45° to 90°.
2.Lightweight and portable design; it is more convenient and faster to use, saving time and effort.
3.Suitable for 1/8 inch (3 mm), 3/16 inch (4 mm), and 1/4 inch (6 mm) small tubing.
4.Suitable for automotive fuel lines and air conditioning refrigerant lines.Also suitable for bending round copper tubing, aluminum tubing, and copper tubing.
5.Processed with high quality aluminum alloy materials, wear resistant, high temperature resistant and have a long service life.

Specifications:

Item type: Tube benderMaterial: Aluminum alloy
Color: Blue
Bending radius: 0-120°
Reference brand: 45-90°
Application: Suitable for small pipes of 1/8 inch (3 mm), 3/16 inch (4 mm), 1/4 inch (6 mm), such as automobile fuel pipes and air conditioning refrigerant pipes. It is also suitable for bending round copper tubes, aluminum tubes and copper tubes.
How to use:
1. Lift the handle of the pipe bander and position the tube into the correct channel size. Make sure the top surface of the tube comes into contact with the support (Fig. 1).
2.Mark the pipe where you need the bend, ensuring the "0" on the handle is aligned with the "o". Slowly lower the handle until the "o" aligns with the desired angle (Figure 2 shows the position for a 45-degree angle, Figure 3 shows a 90-degree angle).
3.If you need the bend to the left of the marked position, align the mark on the pipe with "L" and repeat the necessary movement to bend the pipe.To the right of the mark, position the mark on the pipe with "R".

Package List:1 x Pipe Bender