This voltage display is designed for 1S to 8S lithium battery detection, automatically measuring the voltage and total voltage of each cell. It features reverse connection protection and allows users to monitor the battery's working status to prevent damage from over-discharge or over-charge. The device can be plugged into the battery balance charging connector to check the battery charging status during flight or standby mode.
Technical specifications
Voltage detection accuracy: ±0.01V
Group voltage display range: 0.5V~4.5V
Total voltage display range: 0.5V~36V
1S test mode voltage range: 3.7V~30V
2S-8S low voltage buzzer alarm mode
Alarm voltage setting range: OFF~2.7~3.8V
Dimensions: 40 mm x 25 mm x 11 mm
Installation
Turn the display so that the digital display side is facing up.
Plug the battery balance charging connector into the leftmost pin of the display.
If there is no response, try plugging the balance charging connector in backward.
Usage
The display will emit two beeping sounds upon successful connection.
The voltage readings will be displayed immediately.
Use the small knob on the other end of the display to adjust the alarm voltage.
Features
Brand
TINOR
Weight
100 g
Voltage
30 V
Material
Plastic
Colour
Multicolour
You are here:
The DIY, home and garden specialist
Reliable delivery
Payment in 3x or up to 30 days free of charge
More than 7 million individual and professional customers
'/%3E%3C/svg%3E){kind=small}