1-8s Lipo Battery Tester Monitor with Low Voltage Alarm and LED Indicator for Lipo, Life, LiMn, and Li-ION Batteries (6PCS)

Product Description:

This voltage display is used for detecting 1S~8S lithium batteries. It automatically detects the voltage and total voltage of each lithium battery cell. It supports reverse connection protection.

It allows you to know the operating status of your battery anytime, anywhere, so the battery is not damaged due to over-discharge or overcharge.

Whether in flight or in standby mode, you can connect the EM display to the battery's balance charging connector to see the battery's charging status.

When the voltage is lower than the set value, the buzzer sounds and the red LED flashes; the set value is 3.3V. Press the button to change the set voltage value, and the current user setting is automatically saved.

Product Parameters:

1. For detecting 1S-8S lithium batteries

2. Voltage detection accuracy: ± 0.01 V.

3. Group voltage display range: 0.5 V ~ 4.5 V

4. Total voltage display range: 0.5 V ~ 36 V

5.1S test mode voltage range: 3.7 V ~ 30 V

6. 2S - 8S low voltage audible alarm mode

7. Alarm voltage setting range: OFF~2.7~3.8V

8. Dimensions: 40 mm x 25 mm x 11 mm

Instructions:

Turn the screen upwards (digital display side), plug it in towards you, and insert the battery's white balance charging plug along the leftmost pin of the screen. The screen will immediately emit two "BB" sounds, and the jump number will appear on the screen. If there is no response, plug the white balance charging plug in the other way around. There is a small button on the other end of the display, which is used to adjust the alarm voltage of the display.