1 anti-slip strip glows in the dark, indoor and outdoor anti-slip safety strip for stair treads, 10 m x 5 cm

BRIGHT REMINDER: The strip with a green fluorescent film will glow in the dark, making it easy to highlight stairs and preventing tripping on the last step at night.
ADD GRIP TO PREVENT SLIP: The tape is made from 80-grit aluminum oxide, creating superior and durable traction on slippery areas. This eliminates the worry of slipping and makes you feel safer going up and down stairs.
DURABLE AND REMEDY-FREE ADHESIVE: The high-quality adhesive resists cracking and peeling. When you need to replace or reposition it, it leaves no residue and won't damage your flooring.
SUITABLE FOR DOORS: Ideal for highlighting stair nosings and hazardous steps, such as dock edges. Loading ramps, basement stairs, cinema stairs, bunk rooms, garages, and all other potentially hazardous areas.
APPLICATION SIZE: Easy to install and use, simply peel off the stick and unroll the bubbles; Size: 50mm wide x 10m long, Bright.

Specification

Main Material: Gravel, paper, strong adhesive, fluorescent

Applicable Temperature: 14-140°C / -10-60°C

Suitable for: Flat, clean, smooth, and hard floors or surfaces (e.g., floors, stairs, steps, corridors, ramps, vehicle steps, fire escapes, scaffolding, cinema aisles, etc.)

Not suitable for: Rough, soft, wet, or dusty floors Porous

HOW TO USE?

1. Ensure contact surfaces are flat, clean, and dry when applying.

2. Cut the tape to the desired length and round the corners.

3. Peel off the backing paper and place it in the desired location. (When the temperature is low, gently heat with a hairdryer for best results.)

4. Apply pressure evenly from the center of the strip to both ends. (The applied strip should be left to cure for 24 hours.)

5. Place the tape over a light source for a period of time so that it glows in the dark.

Tips

The tape absorbs in 15 to 20 minutes. The light source may remain faint for a while. (The more light is absorbed, the fainter and longer-lasting the light is, then it slowly weakens.)

If the light line is faint, no problem, it is quite bright immediately after the light is "charged."