1 replacement W400BWHP, GW9530 free-spinning pool vacuum safety wall lock for Zodiac, Hayward, and Pentair suction pool cleaners

Free-rotating Vacuum Lock Safety Wall Mount. Replaces Hayward W400BWHP, W400BBKP, W400BLGP. Also compatible with Pentair Safety GW9530, K12500 Locking Wall Mount. White. Product dimensions: 2 x 2 x 2 inches. The Vacuum/Vac Lock is a safety mechanism designed with a spring-loaded cover that holds the pool cleaner hose in place and will automatically close the suction connection when not in use. It can be used with all suction pool cleaners such as the Hayward Pool Vac, Navigator, Baracuda, Kreepy Krauly, and many other suction pool cleaners. ***Installation Instructions: 1. Apply silicone sealant to the threads 1 1/2" male threads and manually adapt it to the 1 1/2" female threaded wall fitting already installed in the pool. This fitting will connect to the suction side of the plumbing system with a 3-way or ball valve at the equipment. to adjust the flow. 2. Screw into the wall fitting as far as possible AND with the "arrow" pointing upwards. The spring will be at its maximum. 3. Anchor adjustment screw. 4. Use a screwdriver to open the flap, then insert the hose. of the pool vacuum/cleaner. The inner "clip" flap will help hold the pool vacuum/cleaner hose to the wall fitting when the pump is off. 5. When not in use, make sure the flap The cover is securely in place. 6. NEVER operate a pool/spa with an uncovered suction outlet or port. Note: All data is measured manually; please allow for a 1-3 cm error. Due to differences in lighting and display, there may be some color variation; please refer to the actual product received. Quantity delivered: (as shown in the main image)