10 blue 3-way T-fittings with an outside diameter of 8 mm (PE-8)

High quality: Robust and durable, long service life.

Wide range of uses: Used to connect pipelines and various pneumatic components.

Quick connection: Easy assembly and high installation efficiency.

The product is reliable, reusable, and has a long service life.

You can insert or remove the hose directly by hand, allowing for various connections.

It can be used to connect various pneumatic tools and has a wide range of uses.

The air hose clamp is made of robust plastic, airtight, and leak-proof.

Once installed, it can be easily connected according to the desired hose direction.

Material: Plastic

Operating temperature: 0 - 60°C

Working pressure: 0-1 MPa

Fluid type Air only

Tip: Do not apply any additional external loads (bending, twisting, or pulling) to the nozzle, as this may cause damage or leaks.

Press down on the blue washer and insert the tube directly into the bottom. After release, the connection is complete.

Once the bottom seal is good, it can rotate 360 degrees; the seal is good, and there will be no air leaks.

The sealing structure, composed of stainless steel circlips, provides good sealing performance when inserting the tube.

Ensure the tube's cut surface is vertical, there are no scratches on the outer circumference of the tube, and the tube's cross-section is smooth and flat.

When inserting the tube, insert it at the bottom of the tube.

After installing the hose fitting, pull on the hose to ensure it cannot be pulled out of the fitting.

The hose fitting is easy to install, flexible, and compact, and can rotate freely 360 degrees. The release ring has an oval design and is easy to disassemble.

Do not use in areas with excessive dust or particles, or with any medium other than air. This product is limited to air or vacuum environments.