10 brass misting nozzles, 0.1 mm high-pressure spray nozzle, anti-drip spray head for misting system

High-pressure start-up: The nozzle can only be fully opened when the pressure reaches 20-100 kg/cm²/284.47-1422.33 psi, allowing for precise pressure control and ensuring the water flow transforms into a fine mist at its best. However, please note that in areas with hard water, calcium and magnesium ions in the water can gradually form limescale. It is recommended to filter the water before use; otherwise, it will clog the nozzle, preventing proper water flow. Good atomization effect: The spray nozzle incorporates a filter, and the spray holes are manufactured using a high-precision perforation machine, which refines the water flow into tiny mist particles. This technology makes the water mist particles more uniform, improves the mist effect, and increases fog coverage and penetration. Refined craftsmanship: The brass misting nozzle design incorporates anti-clogging and anti-drip technology; every detail has been carefully considered. The misting nozzle passes rigorous water testing to ensure a very low defect rate of less than 0.01%, demonstrating the relentless pursuit of quality. Reliable materials: The replacement misting nozzle is made of brass as its base material and contains a stainless steel spray plate, which offers good corrosion resistance and mechanical strength. This combination of materials in the misting heads can withstand harsh environmental conditions, ensuring stable nozzle operation and extending the misting system's lifespan. Multiple uses: The high-pressure spray nozzle is suitable for greenhouses, construction sites, farms, and other environments, commonly used for cooling, dust suppression, humidification, and disinfection. The brass misting nozzles improve water usage efficiency, making water resource use more economical and environmentally friendly.