10 Pcs Elbow 6mm Tube OD Push to Connect Pneumatic Tube Push Lock Fittings (PV6)

The clip that connects the air line is made of durable plastic, which ensures a good seal to prevent leakage. After installation, it can be easily connected according to the desired direction of the pipe. Material: plasticOperating temperature: 0 - 60°CWorking pressure: 0-1 MPALiquid type: Air onlyTips: Do not apply additional external loads (bending, twisting or pulling) to the pipe fitting, as this may damage it or cause leaks. Insert the pipe straight by pressing the blue joint and the connection is completed after loosening.The stainless steel spring sealing structure can achieve a good seal when inserting the pipe. It has good sealing performance and can be rotated 360 degrees without air leakage. Once the hose is inserted into the bottom of the faucet, it is ready for use and increases work efficiency. Ensure that the cutting surface of the pipe is vertical, there are no scars on the outer circumference of the pipe, and the cross section of the pipe is smooth and flat. When inserting the pipe, the pipe should be inserted to the bottom of the pipe.If the tube is not inserted to the bottom, air leaks may occur. After installing the fitting, pull on the pipe to ensure that it cannot slip out of the fitting. The pipe fittings are easy to install, flexible and space-saving, they rotate freely 360 degrees, and the release ring is elliptical shaped, making it easier to disassemble. Do not use in places where there is too much dust or particles, and do not use fluids other than air. This product is limited to air or vacuum environments. Product advantage: Product parameters: Precautions: