10 Pieces Pool Hose Support 30-38mm Above Ground Pool Accessory with Anti-Puncture, Anti-Tear, Anti-Tension with Cable Clamp and Adhesive Tape

High-quality materials: The pool hose holder is made of ABS plastic, which is sturdy, difficult to deform or break, and has high impact resistance. The hose clamp is made of stainless steel; the edge won't hurt your hands, it won't rust easily, and it has a long service life. Double protection design: As the surface area of ​​the wrapped water hose is increased, the contact area between the hose holder and the pool wall is also increased. The bottom is designed with a rounded arc and no sharp edges to prevent cuts in the pool wall. Effective protection: When the pool spout sinks, this provides excellent support for the pool, preventing the hose from falling and also reducing pressure on the spout's filter wall. It prevents the water hose from becoming too heavy, causing cracks and bulging in the pool wall. Easy to use: First, block the outlet to prevent water from leaking out. Then, remove the hose to install the hose bracket and glue the bracket to the pool wall (make sure it's clean and dry before gluing). Finally, place the hose onto the bracket and secure it with cable ties and hose clamps. Package contents: The 2-piece pool hose bracket comes with 4 cable ties, 2 adhesive strips, and 2 hose clamps for hoses and pipes with a diameter of 30 mm to 37 mm. With its adjustable design, it can be easily fitted and is suitable for most pools on the market.