Charnwood W650 10” Professional Cast Iron Table Saw

For the small professional workshop.

Quiet 3hp Induction Motor with Brake
Cast Iron Precision Ground Table
Extension Tables as Standard Equipment
Finely Adjustable Rip Fence
Sliding Carriage as Standard Equipment

The main table is precision ground cast iron to give a flat surface that will last forever. The surface area is further increased with the addition of 2 steel extension tables offering greater support when working with larger panels and boards.

The guide fence for ripping operations slides smoothly along a solid steel bar with a measuring scale marked out in millimetres. The fence itself can be used in two positions.

The sliding mitre fence is adjustable to 60 degrees in each direction. It has preset stops to locate it accurately at 45 degrees and 90 degrees.
The fence itself can be locked at any angle from 90 to 45 degrees, and there is a positive stop to ensure the fence returns back to the 90 degree position. A work clamp ensures timber stays locked in position during the cut.

The power is generated from a 2200w (3 hp) induction motor which gives a low noise level and will run from any standard 13amp, 240v power supply.
Setting the sawblade angle and height is done using two separate hand wheels.A large easy to read scale on the front face of the machine allows accurate bevel angles to be set.

Supplied with 36 tooth TCT sawblade, push stick, rip fence, mitre guide, 1.8m power cable and UK 3 pin plug.

Main Table Size 750mm x 1000mm
Maximum Ripping Width Using Fence 605mm
Crosscut Table Size 400mm x 180mm
Maximum Crosscutting Width 550mm
Blade Tilt 90 – 45 degrees
Cutting Depth at 90 degrees 80mm
Cutting Depth at 45 degrees 56mm
Blade Diameter 250mm
Motor (induction) Braked 2200w (3hp) / 240v
Dimensions (WxDxH) 1440mm x 1070mm x 1120mm
Min Door Opening:Width In Crate 72cm
Weight 125Kg
Product Guarantee 5 Years