100 A MPPT solar charging controller, USB ports, backlit LCD screen, solar panel regulator of 12 V, 24 V, 36 V and 48 V, maximum input of 100 V DC, for lead/acid batteries.

Characteristics:
MPPT technology: Solar regulator MPPT 100A, which uses an advanced algorithm for sequencing the maximum power point MPPT, with automatic identification 12V, 24V, 36V, 48V; Back 5V USB charging ports allow you to quickly maintain the maximum power point of the photovoltaic system in any case, with a charging efficiency greater than 99.5%. The energy efficiency of the solar systems is considerably improved.
MULTIFUNCTIONAL DESIGN: multi-function LCD panel with retro-illumination and time display, which offers 7 operating modes: charging mode, light control mode, temporal control mode, universal control mode, manual mode and Temporal control mode.
SAFETY VOLTAGE PROTECTION: MPPT solar regulator with voltage protection, including protection against overvoltage and battery overload, current panels, overloads, deep discharge, polarity inversions and overheating.
USER-FRIENDLY DESIGN: The LCD panels are designed to dynamically display the operating devices and the operating status of the devices. Display of control parameters (operating mode, battery voltage, photovoltaic charging current, battery charging current, product operating temperature, return). LifePO4.

Specifications:
Type of article: Solar charging controller
Material: ABS
Nominal current: 100 A
Maximum solar consumption (Voc): 15-23 V (battery 12 V); ; 30-45V (24V battery); 45-69V (36V battery); 60-90 V (48 V battery) Maximum photovoltaic power: 1200 W (12 V battery); 2400 W (24 V battery); 3600 W (36 V battery); 4800W (48V battery)

Mode of use:
1. Loading method: Loading is prohibited. 2. Light control mode: When the control detects the night, it will be discharged for several minutes before it starts. When it detects the day, it will reverse the download for four minutes before it is released.
3. Light and delay control mode: When the controller detects the night, it will detect the discharge of four minutes before it starts and the ignition cue (if the minute is set to 0) will be held. The maximum delay is 23:59.
4. General control method: Always keep it unloaded without defects.
5. Manual control mode: Use the “▼” key To check if the load has been carried out.
6. Time control method: Activates or deactivates the load regularly.
7. Mode mode: Same as the lighting and delay control modes, but with a loss of only ten minutes.
8. The control continues to discharge low voltage protection. The “▼” touch screen Stays on for 5 seconds, charging continues.

Contains:
1 controller