100A MPPT Solar Charge Controller – Dual LCD Display – 12V/24V – Charge Optimization with Advanced Technology

General Description

This MPPT solar charge controller is designed to optimize battery charging using advanced technology. It offers 16-bit sampling accuracy for real-time display of charge and discharge parameters.

Technical Specifications

Material: ABS Available options: 40A, 50A, 60A, 100A

Battery Voltage: 12V/24V

Solar Panel Voltage: 12V, 18V, 24V, 36V

Float Charge: 13.7V (adjustable) Discharge Cut-off: 10.7V (adjustable) Discharge Reconnect: 12.6V (adjustable) Self-Consumption: <10mA

USB Output: 5V / 2A maximum

Compatibility and Accessories

Compatible with various lead-acid batteries (open, sealed, gel, etc.) Recommended installation near the battery to avoid voltage drop. Use only with photovoltaic panels as the charging source.

Installation

During initial installation, ensure the battery has sufficient voltage for the controller to recognize the battery type. Install the controller on a good quality, flat surface to prevent overheating.

Operation

The controller manages charging in three stages, effectively protecting the battery against short circuits, open circuits, reverse polarity, and overcharging. It is designed for continuous use with non-stop detection during charging.

Other Information

This controller is a simplified version of MPPT, ensuring high charging efficiency and bidirectional focus tracking.