100A MPPT solar charge controller, dual USB ports, backlit LCD screen, max input 100V DC, compatible with lead-acid and lithium batteries

General Description

The 100A MPPT solar charge controller is an advanced device designed to optimize the efficiency of photovoltaic systems. Thanks to its MPPT technology, it enables precise tracking of the maximum power point, ensuring a tracking efficiency greater than 99.5%. It is equipped with two 5V USB charging ports and a backlit LCD screen that displays real-time operating data. This controller is compatible with several battery types, including GEL, flooded electrolyte, and LiFePO4 batteries.

Technical Specifications

• Item Type: Solar Charge Controller
• Material: ABS
• Rated Current: 100A
• Maximum Solar Power Consumption (Voc): 15-23V (12V battery); 30-45V (24V battery); 45-69 V (36 V battery); 60-90 V (48 V battery)
• Maximum photovoltaic power: 1200 W (12 V battery); 2400 W (24 V battery); 3600 W (36 V battery); 4800 W (48 V battery)

Installation

To install the regulator, follow these steps:

• Connect the regulator to the battery, observing the correct polarity.
• Connect the solar panels to the corresponding inputs.
• Ensure all connections are secure before powering on the system.

Operation

The regulator offers several operating modes:

• Charge mode: Charges the battery by optimizing solar energy.
• Light control mode: Delays discharge for ten minutes after nightfall is detected.
• Timed control mode: Allows you to program discharge cycles.
• Manual mode: Allows direct control of the discharge.
• Test mode: Simulates the control modes with a reduced delay.

It is important to avoid excessive battery discharge to prolong its lifespan. life.

Other information