100cm Insulating Door Bottom, Self-Adhesive Door Draft Stopper, Silicone Door Draft Stopper, Anti-Cold Thermal Insulation (100 x 5cm, Black)

General Description

The 100cm insulating door bottom is a self-adhesive silicone door draft stopper, designed to effectively block airflow, prevent wind and heat loss in winter, while maintaining a comfortable room temperature in summer. This multifunctional product also prevents light, dust, and insects from entering, while offering some sound absorption.

Technical Specifications

Dimensions: 100 x 5 cm

Material: Silicone

Construction: Three-layer hollow with a 1 mm groove

Adhesive layer width: 2 cm

Gap coverage: 0 to 3 cm

Installation

To install the insulating door bottom, follow these simple steps:

Clean the door surface.

Cut the appropriate length according to the size of the door.

Peel off the adhesive backing and stick it under the door.

Make sure it adheres firmly to the surface.

For best results, let it dry for 12 minutes.

hours.

It is advisable to heat the adhesive with a hairdryer before installation to optimize adhesion.

Use

This insulating door draft stopper is ideal for use on various types of doors, including:

Wooden doors

Metal doors

Glass doors

Sliding doors

Bedroom doors

Entrance doors

Other information

The bottom of the door should be slightly above the floor once installed for optimal performance.