100cm Insulating Door Draft Stopper, Self-Adhesive Door Draft Stopper, Silicone Door Draft Stopper, Anti-Cold Thermal Insulation (100 x 5cm, Black)

Multifunctional Draft Excluder: Cold insulating draft excluder can effectively block air flow, prevent wind and heat loss in winter and ensure optimal cold air in the house in summer to ensure an ideal room temperature. Self-adhesive draft excluder door can also block light, prevent dust, insects, etc. and play a sound absorption role to a certain extent, Ideal for front door insulating seal Groove and Triple Design:

    Door bottom features a three-layer hollow construction to ensure that the force is evenly distributed when the door seal rubs against the floor at the bottom. In addition, the insulating draft excluder has a 1mm groove in the middle which

  can be bent.This makes it easier to open and close the door, reduces friction and increases its service life.High Quality Material: Insulating door bottom is made of silicone, soft and elastic, with high wear resistance

  and anti-aging. Compared with other door seals, the grooved and hollow construction ensures that our door seal has less friction with the ground and absorbs uniform force without deformation, making it easier and more convenient to use. Good Adhesion: Door seal uses a self-adhesive backing with a 2 cm wide adhesive layer, which can firmly stick to the bottom of the door and is not easy to fall off. The door seal seals gaps from 0 to 3 cm and is suitable for all types of doors.Please note that the door seal should be slightly above the floor when installed.Wide Application: Door draft excluder insulation can be installed on doors made of various materials, including wooden doors, metal doors, glass doors, etc. Whether it is a sliding door, bedroom door or front door, wind, light and air circulation can block and prevent insects from entering

    your homeEasy to Install: Cold insulated door sweep is very easy to use. Simply clean the door surface, cut the appropriate length according to the door length, peel off the adhesive and stick it under the door. Make sure

  that it adheres firmly to the door surface. For best results, let it dry for 12 hours. NOTE: For best performance, it is best to heat the glue with a hair dryer before installation.