100cm Silicone Shower Barrier, Self-Adhesive Anti-Overflow Shower Threshold, Splash Guard, Foldable Shower Barrier for Bathroom Floors – Black

General Description This 100cm long silicone shower barrier prevents water from overflowing and keeps your bathroom clean and dry. At only 18mm thick, it is discreet and poses no tripping hazard. Made from high-quality, elastic silicone, it is water-repellent, mold-resistant, and easy to clean, making it ideal for year-round use. Technical Specifications Length: 100 cm Height: 18 mm Material: Elastic silicone Features: Waterproof, mold-resistant, heat-resistant, and frost-resistant Compatibility and Accessories Can be installed on various smooth surfaces: floors, sinks, countertops, bathtub edges, washbasins, etc. Adhesive backing for easy and permanent installation Installation Before installing the shower screen, ensure the surface is clean, dry, and dust-free. Proceed as follows: Cut the shower barrier to the desired length using a knife. Remove the protective film from the adhesive. Stick the shower barrier to the desired surface. Press firmly to ensure good adhesion. For curved surfaces, cut the barrier at a 45-degree angle for better stability. Uses The shower barrier can be used to: Prevent water leaks between the countertop and the wall. Prevent dirt from seeping into the joints between surfaces. Separate dry and wet areas. Additional Information For increased durability, it is recommended to seal the edges with silicone (not supplied). Allow the barrier to dry for 30 hours after installation before exposing it to water.