108-tooth diamond blade for cutting tiles, marble, concrete 10.4 cm

108-tooth diamond disc for cutting tiles, marble, stone and concrete

This diamond cutting disc is designed for precise cutting work on mineral materials and hard coverings. Suitable for demanding DIY needs as well as more regular use, it allows work on tiles, marble, stone, concrete as well as certain vitrified materials such as porcelain stoneware and microcrystalline board. Its 108-tooth design promotes a clean, even and better-controlled cut, while limiting chipping on fragile surfaces.

This type of circular blade is particularly sought after for renovation sites, tile laying, interior fitting and finishing work. Thanks to its structure designed for hard materials, this diamond disc offers a good compromise between cutting precision, wear resistance and stability during use.

Main advantages

• Precise cutting on tiles, marble, stone and concrete
• 108 teeth for a cleaner and more even finish
• Suitable for dense materials such as vitrified porcelain stoneware
• Good abrasion resistance for use on mineral materials
• Compact format easy to handle depending on the compatible machine
• Ideal for renovation, installation and adjustment work

A disc suited to demanding materials

Vitrified tiles, marble and certain technical stones require a cutting accessory capable of maintaining good precision without damaging the edges. This diamond disc for a circular saw or compatible cutting machine meets this requirement thanks to its fine toothing and its structure designed for construction and covering materials. It is suitable for straight cuts, edge adjustments and finishing work where cutting quality is essential.

For a tradesperson, a tiler or a private individual wishing to achieve a clean cut on slab, tile or mineral board, this disc represents a practical solution for reducing the risk of chipping, particularly on decorative materials with a hard surface.

Recommended uses

• Cutting wall or floor tiles
• Work on marble and natural stone
• Cutting porcelain stoneware, vitrified tiles and microcrystalline materials
• Adjusting mineral slabs during renovation
• Occasional work on concrete depending on compatibility of the machine used
• Installation finishing in bathrooms, kitchens, terraces or living spaces

Product characteristics

The blade stands out for a design focused on precision. The 108 teeth allow finer cutting action, useful for brittle or very hard materials. The disc is designed to offer good mechanical strength during rotation, with a profile suited to cutting operations on mineral surfaces. Its compact format makes storage, handling and integration into compatible cutting equipment easier.

This cutting disc for stone and tiles can be used in different site contexts, particularly when clean cutting and control of the line are important criteria. It is suitable both for new installation work and for replacement or repair work.

Technical information

• Product type: diamond cutting disc
• Toothing: 108 teeth
• Compatible materials: tiles, marble, stone, concrete, microcrystalline materials, vitrified tiles
• Usage category: cutting construction and covering materials
• Length: 10,40 cm
• Width: 10,40 cm
• Height: 0,13 cm
• Volume: 14,06 cm³
• Weight: 160 g
• Colour: not specified
• Main material: disc structure with diamond part for cutting
• Installation: fitting on a compatible machine, to be checked according to bore and required diameter

Instructions for use

Before installation, it is recommended to check the compatibility of the disc with your cutting machine, in particular the diameter, the bore, the permissible rotational speed and the type of material to be worked. For a cleaner cut, it is advisable to maintain a steady feed without forcing, allowing the disc to work progressively. On fragile materials such as marble or vitrified tiles, careful cutting with a well-stabilised machine helps improve the final result.

Remember to wear suitable protective equipment, in particular goggles, gloves and hearing protection. Use on dry material or with cooling depends on the machine and the conditions of use. It is also advisable to check the condition of the disc before each use and not to use a damaged accessory.

Package contents

• 1 108-tooth diamond disc for cutting tiles, marble, stone and concrete

This diamond disc is a useful cutting accessory for users seeking a precise solution for hard materials and clean finishes. Its versatile positioning for tiles, stone and concrete makes it a relevant choice for installation, adjustment and renovation work in the building and interior fitting sector.