10pcs 2-Pin L-Shaped LED Strip Connector, Right Angle Corner Connector for 10mm Wide Single Color SMD 5050 5630 LED Strip, Solder Free [Energy Class
Buying for your business?
Negotiated prices excl. VAT up to -20%
You may also like
Compare with similar items
Product information
Description
If you are using a waterproof LED strip, please remove the silicone around the soldering/cutting line first, then insert the LED strip into the connector. Make sure the 2 copper contacts of the LED strip are under the 2 electrical conductors of the connector.
5. Close the cap.
Note: If the LED strips are flashing or not lighting up, please follow the following steps:
1. Power on your LED strip.
2. Open all connector caps.
3. Insert your LED strip into the connector, pull and push your LED strip lightly to adjust the contact points between the 2 copper contacts of your LED strip and the 2 electrical conductors of the connector.If the LED strips still do not light up, use a thin, hard object to simultaneously press on both ends of each electrical conductor in the connector to lower the contact points on the two conductors.This ensures that the two electrical conductors in the connector are fully in contact with the two copper contacts on the LED strip, guaranteeing good electrical conductivity.The package includes:10 L-shaped connectors for a 10mm wide monochrome LED strip, with two copper contacts on each cut line.
Features
- BrandOTHERS
- ColourWhite
- Width10 mm
- MaterialPlaster
- Type of connectionPlug-in
- ManoMano ReferenceME242971202
- MMID215148526317
- Product codeYS-UK26Z12566
- EAN4016245724669
'/%3E%3C/svg%3E){kind=small}