10pcs 2-Pin L-Shaped LED Strip Connector, Right Angle Corner Connector for 10mm Wide Single Color SMD 5050 5630 LED Strips, Solder Free [Class]

2-pin L-shaped corner connector for 10mm wide SMD 5050/5630 monochrome LED strip lights.

The 2-channel L-shaped board with 2 easy-to-close ports provides a seamless connection for your 2-pin SMD 5050/5630 monochrome LED strip lights.

Simple yet effective, tool-free installation; easy to install thanks to a cutting system, creating clean and beautiful LED strips around corners.

With these L-shaped connectors, you can avoid twisting your LED strips, which could damage them.

Package contains 10 L-shaped connectors.

Installation Instructions:

1. 1. Ensure your LED strip is a 10mm wide monochrome LED strip with two copper contacts (+, -).

2. Carefully cut your LED strip along the cut line.

3. Open the connector cap.

4. If using a non-waterproof LED strip, insert it into the connector. Ensure the two copper contacts on the LED strip are positioned under the two electrical conductors in the connector.

If using a waterproof LED strip, first remove the silicone around the solder/cut line, then insert the LED strip into the connector. Ensure the two copper contacts on the LED strip are positioned under the two electrical conductors in the connector.

5. Close the cap.

Note: If the LED strips flicker or do not light up, please follow these steps:

1. Turn on your LED strip.

2. Open all the connector caps.

3. Insert your LED strip into the connector, gently pull and push the LED strip to adjust the contact points between the two copper contacts on your LED strip and the two electrical conductors on the connector. If the LED strips still do not light up, use a thin, hard object to simultaneously press on both ends of each electrical conductor in the connector to lower the contact points on the two electrical conductors. This will ensure that the two electrical conductors in the connector are fully touching the two copper contacts on the LED strip, guaranteeing good electrical conductivity.

Package includes

10 L-shaped connectors for a 10mm wide monochrome LED strip, with two copper contacts on each cut line.