10pcs 2-Pin L-Shaped LED Strip Connector, Right Angle Corner Connector for 10mm Wide Single Colour SMD 5050 5630 LED Strip, Solder Free [Energy Class A++]
You may also like
![[NEVER USED] Backlight for 32-inch Gaming Monitor with Color Synchronization, Compatible with Windows Computers](https://cdn.manomano.com/images/images_products/42580108/P/181899384_1.jpg)
![[NEVER USED] Gaming monitor backlight with color synchronization, compatible with 27-inch computer screens and Windows computers. [Energy Class C]](https://cdn.manomano.com/images/images_products/42580108/P/181901373_1.jpg)
![[NEVER USED] Backlight for 24-inch Gaming Monitor with Color Synchronization, Compatible with Windows Computers](https://cdn.manomano.com/images/images_products/42580108/P/181907519_1.jpg)
Compare with similar items
Product information
Description
2-pin L-shaped corner connector for 10mm wide SMD 5050/5630 monochrome LED strip lights.
The 2-channel L-shaped board with 2 easy-to-close ports provides a seamless connection for your 2-pin SMD 5050/5630 monochrome LED strip lights.
Simple yet effective, tool-free installation; easy to install thanks to a cutting system, creating clean and beautiful LED strips around corners.
With these L-shaped connectors, you can avoid twisting your LED strips, which could damage them.
The package contains 10 L-shaped connectors.
Installation Instructions:
1. Ensure your LED strip is a 10mm wide monochrome LED strip and has 2 copper contacts (+, -).
2. Carefully cut your LED strip along the cut line.
3. Open the connector cap.
4. If you are using a non-waterproof LED strip, insert the LED strip into the connector. Ensure that the two copper contacts of the LED strip are under the two electrical conductors of the connector.
If you are using a waterproof LED strip, first remove the silicone around the solder/cut line, then insert the LED strip into the connector. Ensure that the two copper contacts of the LED strip are under the two electrical conductors of the connector.
5. Close the cap.
Note: If the LED strips flicker or do not light up, please follow these steps:
1. Turn on your LED strip.
2. Open all connector caps.
3. Insert your LED strip into the connector, then gently pull and push the LED strip to adjust the contact points between the two copper contacts on your LED strip and the two electrical conductors on the connector. If the LED strips still do not light up, use a thin, hard object to simultaneously press on both ends of each electrical conductor inside the connector to lower the contact points on the two conductors. This will ensure that the two electrical conductors in the connector are fully touching the two copper contacts on the LED strip, guaranteeing good electrical conductivity. The package includes: 10 L-shaped connectors for a 10mm wide monochrome LED strip, with two copper contacts on each cut line.
Features
- BrandWOIYIC
- Width10 mm
- Height10 mm
- ColourTransparent
- Pcs per pack10 .
'/%3E%3C/svg%3E){kind=small}