10V-60V 30A Discharge Control Module, Over-Discharge Protection for Storage Batteries

Welcome to our shop! Discover our battery control module, an essential device for the intelligent and safe management of your batteries. This module ensures automatic charging and discharging, with automatic cutoff, and is perfectly suited for storage (lead-acid) and lithium batteries. Its parameters are adjustable and remain saved in memory even after a power outage, thus guaranteeing a long-lasting configuration. **Key Features:** **Thick printed circuit board** for long-lasting performance and excellent heat dissipation.** **Easy installation and safe operation**, designed for simple integration into your systems.** **Adjustable parameters with memory**: Customize the trigger voltages; settings are retained in the event of a power failure.** **Versatility**: Suitable for both storage and lithium batteries.** **Intelligent automatic operation**: Automatically charges the battery and disconnects the load when the voltage is too low; Discharges and reconnects the load when the voltage exceeds the set threshold, thus optimizing the protection and lifespan of your battery.**Detailed Specifications:*** Control Voltage: 10V - 60V* Control Current: 30A* Control Accuracy: 0.1V* Voltage Deviation: ±0.1V* Application: Storage batteries and lithium batteries* Dimensions: Approx. 9.5 x 6 x 3.3 cm / 3.7 x 2.3 x 1.2 inches* Weight: 110g**Setting Method (example for a 12V battery):**1. **S1 - Overvoltage (charge stop / charge start)**: In normal mode, press S1 to view the current value. Press and hold S1 until the display flashes, then adjust the value (e.g., 14.4V) using S1/S2. 2. **S2 - Undervoltage (Start/Stop Charging)**: In normal mode, press S2 to view the current value. Press and hold S2 until the display flashes, then adjust the value (e.g., 10.5V) using S1/S2. *Tip: If the undervoltage value cannot be increased, adjust the overvoltage value first.* 3. When the battery voltage drops below the threshold (e.g., 10.5V), charging is disconnected after a 6-second delay to prevent false triggers due to fluctuations. 4. When charging is disconnected and a charger is connected, charging automatically stops once the overvoltage threshold is reached (e.g., 14.4V). 5. **Factory Reset**: In normal mode, press and hold S1 and S2 until "888" is displayed. **Important:** The module is battery-powered. Always connect the battery first. **Package Contents:** 1 x Battery Control Module