0-10V LED dimmer switch, rotary dimmer. Connect a 0/1-10V dimmable LED power supply for dimmable LED lights, incandescent lamps, and halogen lamps.

【Professional Dimming】: This 0-10V rotary knob dimmer supports a single-channel 0-10V dimming signal output. It connects to 0-10V dimmable LED drivers for smooth, flicker-free brightness adjustment. Suitable for various dimming applications, including home, office, and commercial lighting. 【Rotary Control】: Easily turn lights on/off and adjust brightness by rotating the knob. A clockwise rotation increases brightness, and a counterclockwise rotation decreases it. Its intuitive and convenient operation requires no complex setup. Must be used with a dimming power supply to adjust the brightness of LEDs, incandescent bulbs, and halogen lamps. 【Flexible Wiring】: This LED dimmer switch offers two connection options. It can be connected directly to a 0/1-10V dimmable power supply or via an AC output to a 0/1-10V dimmable power supply. Suitable for LED lamps up to 300W and supports up to five power supplies. (Note: If the total load exceeds 3.0A or the inrush current exceeds 1.5A, a relay or AC contactor is required.) 【Safety Protection】: The dimmer incorporates overload, short-circuit, overcurrent, and overheat protection to ensure safe operation. A white indicator light illuminates upon activation, clearly indicating the operating status. 【Signal Interface】: Under pure signal reception conditions, the dimmer has no power limit. The 0-10V signal connector is connected to the 0-10V interface of the power supply. Each connection draws more than 1mA. The 0-10V dimmer receives a 0-10V signal. The maximum cable length from the 0-10V dimmer to the LED power supply must not exceed 15m. In practice, a 1.5 mm² copper cable is recommended as the signal cable.

Specifications:

Material: ABS

Input Voltage: AC 85-265V

Output Voltage: AC 85-265V

Output Signal: 0-10V (20 mA)

Output Current: max. 3.0A (AC)

Input signal: Rotary knob

Dimming range: 0-100%

Operating temperature: -30°C to +55°C

Maximum enclosure temperature: +65°C

IP rating: IP20

Product dimensions: 85.8 × 85.8 × 43.7 mm

Product weight: 93 g

Package contents:

1 × LED dimmer switch

2 × screws

1 × instruction manual (English + Chinese)