11.8 Inch Natural LP Propane Universal Push Button Piezo Ignition Kit for Gas Grills, Stoves, Heaters, Stove Generators, 2-Piece Set
Buying for your business?
Negotiated prices excl. VAT up to -20%
You may also like
Compare with similar items
Product information
Description
DIY kit fits all propane gas and natural gas appliances, grills, fireplaces, stoves, but may require some modifications during installation, will not fit all current mounting holes or wire lengths, cable length is 11.8 inches. (If the power is not enough, you can use two)
Output voltage: >=20kv, spark distance: 3-5mm, wire length 30cm, electrode: M10*1 length: 57mm. Head with universal mounting thread.
No batteries required, just press once to create a spark, but otherwise the spark will jump to the bottom instead of the top burner, Lifespan: Over 30,000 times. You may need to push the rod to get the right spark.
INSTALLATION TIP: VERY IMPORTANT!!! - You need to hold it against a metal control panel, or add metal to get the right mono core, to get the right spark. Without a good connection, the igniter will not light the burner because the spark will not come from the electrode pin head.
Straight needle length: 19.5mm, head 135 degrees 9.0mm, thread strength 392℉. If the kit fails to ignite the burners, check the body of the burners and make sure the grouped points on the igniter connect well with the body of your sheet metal grill. (It cannot be connected to the exposed body, but must be connected to a conductive material.
Features
- BrandOTHERS
- ColourWhite
- MaterialPlaster
- ManoMano ReferenceME243089376
- MMID760416071722
- Product codeYS-UK26Z37755
- EAN4011660376554
















