110 pieces compact wire connectors, electrical connector blocks, 55 pieces 2-port clamps / 45 pieces 3-port clamps / 10 pieces 5-port clamps (110 pieces)

General Description: Compact wire connectors are designed to provide an efficient and secure solution for electrical wiring. This kit includes 110 pieces, comprising 55 two-port connectors, 45 three-port connectors, and 10 five-port connectors. They are suitable for solid wires from 0.5 to 4 mm² (20-12 AWG) and stranded wires from 0.2 to 2.5 mm² (24-14 AWG). These connectors are widely used in various fields such as building wiring, industry, lighting, security, communications, and networking. Thanks to their innovative design, they reduce wiring time by 60 to 70% compared to traditional methods. Technical Specifications Number of pieces: 110 Connector types: 55 PCS (2 ports), 45 PCS (3 ports), 10 PCS (5 ports) Wire compatibility: 0.5 to 4 mm² (20-12 AWG) for solid wires, 0.2 to 2.5 mm² (24-14 AWG) for stranded wires Material: Modified flame-retardant PA6 nylon Voltage: 4KV Installation To install the connectors, follow these simple steps: Pull back approximately 11 to 12 mm of the wire insulation. Gently push the orange clip upwards at a 90° angle. Insert the stripped wire into the connector. Press the lever to secure the wire. Use The wire connectors allow for a secure connection without the need for additional tools. Each connector is equipped with a test hole, allowing you to check if the terminal is powered without disconnecting the connector. They are reliable and reusable, thus preventing short circuits and fire hazards related to the aging of the wire's frequency bands. Other information: The connectors are made of high-quality, high-conductivity copper. They are designed to prevent breakage during use. The connectors are recyclable.