110 V AC COB LED strip for outdoor use — Waterproof, 20 m (65.6 ft), Natural white 4000 K, Ultra-bright, 200 W, CRI 90+ — Flexible and divisible (IP65) — For bedrooms

【Waterproof Outdoor COB LED Strips】 These COB LED strip lights feature an IP65 waterproof rating for outdoor use, making them suitable for both indoor and outdoor applications — such as bedrooms, gardens and commercial environments. As a safety precaution, please do not immerse the LED strips in water for extended periods of time.

【110V–120V AC COB LED Strip】This 65.6ft(20m) high voltage COB LED strip light operates on 110V–120V AC power. It guarantees constant brightness from one end of the strip to the other, thus providing illumination more uniform and more radiant. It is supplied complete with a power plug and a rectifier; no special power adapter is required!

【Ultra-bright COB LED strip】 It features high output power (200 W/20 m), high brightness (800 lm/m), high density (288 LED/m) and a Color Rendering Index (CRI) above 90. The diffusion angle of 180 degrees offers a 50% wider lighting range, ensuring uniform illumination without shadow areas.

【Flexible and breakable】 These flexible COB LED strip lights can be applied to various curved and irregular surfaces; their use is not limited to vertical walls. The strip can be cut off every 50 cm; after cutting, please ensure that exposed ends are properly insulated and sealed to prevent any risk of electric shock. Use BENLUN connectors to connect the sections after cutting; do not use junction connectors standard.

【Safe to use】 These LED light strips have obtained CE and RoHS certifications. In addition, they have a protective silicone coating to reduce the risk of electric shock. For safety reasons, do not attempt to install or repair the lights while they have power. Package includes a generous number of mounting clips and screws for installation (please note that the light strip is not self-adhesive); be careful not to damage the layer External silicone protector during installation. 【Important Notes】 Do not leave the power on for more than 15 seconds while the LED strip is still wound on its spool, as this may cause overheating and melt it. After 15 seconds, be sure to unwind the LED light strip before restoring power.