12-Way 32V Fuse Box, Fuse Holder Protective Blocks for Blade Fuses in Cars, Automobiles, Boats, Marine Vehicles, Trucks, and SUVs (12 Ways)

Product Name: Independent positive and negative poles into the multi-output fuse box with LED indicator [12 into 12 out]. Product Model: CS-1469B1 Net Weight: 279g Gross Weight: 285g Product Size: 138.25*85*36.5mm Material: PBT, waterproof PC dust cover, nickel-plated copper connection terminals, PPX40 stickers Input Voltage Rated: 32V Input Current Rated: 100A Maximum Output Current: 30A per circuit Indicator Color: Red Main Wire Terminals: M5 Threaded Studs Main Wires: #4-6 Single Wire Terminal: M4 Threaded Studs Single Wire: #12-16 Indicator Light: When the red indicator light is on, it means the fuse has blown and needs to be replaced promptly to maintain operation. Product Scope]: Can be installed in small cars, villas, caravans, buses, yachts, boats, and other uses listed above. Product Scope]: Can be directly connected to any electrical device in the car/boat via the power line [such as: dome light, car headlights, daytime running lights, fog lights, signal lights, car refrigerator, car charger, car fan, car TV, etc. Product Accessories: 2 x Stickers; 4 x Self-Tapping Screws; 6 x 20A Fuses; 6 x 15A Fuses; 6 x 10A Fuses; 5A fuse x6 Function of fuses: In the event of a malfunction or fault in the circuit, the current increases and may damage important or valuable equipment in the circuit, burn out the circuit, or even cause a fire. Fuses protect electronic equipment is protected against overcurrents and serious injury caused by internal malfunctions. That's why each fuse has a rated value and blows if the current exceeds that value. If a fuse is correctly placed in a circuit, it will blow automatically when the current abnormally reaches the upper limit for height and temperature, thus protecting the circuit's operation. Product Advantages]: [1] The product is made of flame-retardant PBT material that is resistant to high and low temperatures, which meets the following requirements: [the fuse holder has good mechanical strength, good insulation, good heat resistance, and good flame retardancy, and should not produce fracture, deformation, combustion, or short-circuit phenomena during use. 2] All busbars and fuse holders are made of nickel-plated copper, offering corrosion resistance and excellent electrical conductivity. [3] All fasteners are made of stainless steel. The fuse box inlet and outlet are secured with clamping screws for faster installation, while the fuse box itself is secured with self-tapping screws, making installation simpler and more secure. [4] The product features a red LED indicator, corresponding to each fuse connected to the electrical devices. When a fuse is blown, the red light illuminates, allowing you to immediately identify which fuse is faulty—a convenient and timely solution! ! [5] Additional stickers: The stickers can be labeled with the name of the device, corresponding to our connected devices. When the fuse blows, the red light illuminates, allowing us to quickly identify which devices are out of order. of the problem, saving time and effort! Note: All data is measured manually. Please allow for a 1-3 cm error due to differences in lighting and display. There may be slight color variations; please refer to the actual item received.