120W 10L/min self-contained electric diaphragm pump for 24V/5A high-pressure cleaner

Welcome to our shop! Discover our high-performance pump, designed for exceptional reliability and longevity. With a power output of 120W, it delivers a powerful flow rate with an impressive maximum head of 130 meters. Its compact design makes it easy to install in various configurations. This pump has a theoretical flow rate of up to 10 liters per minute. It is equipped with overcurrent protection for safer use.

**Versatile Applications:**

Ideal for a wide range of equipment such as pressure washers, water spraying systems, pesticide spraying, garden irrigation, filling machines, and many more.

**Technical Specifications:**

* Maximum Power: 120W

* Maximum Pressure: 13 kg/cm²

* Operating Pressure: 8 kg/cm²

* Flow Rate at Opening: 10 L/min

* Vertical Suction: 1.5 meters

* Head: 130 meters

**Package Contents:**

You will receive a complete set including:

* 1 x Pump

* 1 x Filter (mesh)

* 1 x Pump Handle

* 3 x Mounting Screws

* 1 x Spare Fuse Set

**Operating Instructions:**

1. Connect the pump to the inlet and outlet hoses. Ensure the connections are airtight to prevent pressure loss or leaks. (Note: Arrows on the cover indicate the water inlet and outlet directions.)

2. Install the supplied filter at the suction (inlet) end. A filter density of at least 80 meshes per square centimeter is recommended.

3. Connect the diaphragm pump to the electric motor. Verify that the power supply's electrical parameters meet the motor's requirements.

4. Turn on the power to start the pump.

5. Allow the water to flow for 5 to 10 seconds to purge any air from the pump and pipes. Once the flow has stabilized, temporarily turn off the power before connecting your spray gun or pump head. **Important Notes:** * The actual color of the product may differ slightly from the photos due to lighting conditions. * Slight variations in measurement may occur. * **Caution:** This pump does **not** have a function to control a faucet. * **Crucial Warning:** If the pump is connected to a faucet, it is **imperative** that the faucet be fully open before starting the pump. Running the pump dry (without water) will damage and burn out the pump.