125Psi Air Compressor Pressure Valve Control Manifold Regulator

General Description The 125Psi air compressor pressure valve control manifold regulator is designed for piston compressors. It offers automatic charging and discharging control, with a convenient on/off switch button. This regulator allows the compressor to turn on when the pressure is below 90 PSI and turn off when the pressure exceeds 120 PSI. Technical Specifications Material: Plastic, Aluminum Electroplating, Iron Maximum Switch Voltage: 240V Maximum Switch AMP Rating: 20A Pressure Switch Control Range: 95-125 PSI Applicable Pressure Range: 0.05 to 1.2 MPa Maximum Flow Rate: 3000 L/min Size: 16 cm x 10.5 cm x 13 cm (6.3" x 4.1" x 5.1") Inlet Diameter (G): 1/4" Internal Thread Pressure Gauge Gauge (RC/G): 1/8"; 1/4" Pressure Switch Interface (R): R1/4" External Thread Installation During installation, it is advisable not to use raw material tape too tightly around the seams to prevent them from breaking. For small parts, the use of thread adhesive is recommended, and it is important to allow the adhesive to dry before use. Operation The regulator adjusts the pressure range between 30 and 120 PSI. It is designed for automatic operation, turning the compressor on when the pressure is below 90 PSI and turning it off when the pressure exceeds 120 PSI. Other information: Package includes: 1 x Air Compressor Pressure Valve Switch. Accessories: Cast and polished 316 stainless steel, corrosion-free synthetic fittings. Contains durable rubber O-rings for an effective seal.