12V 16A digital programmer socket - 16 programs + LCD + waterproof case - Electric timer - Anti-theft and energy saving - Individuals and professionals

【12V Programmable Timer】Our product not only adds a set of connection terminal blocks, you do not need to purchase external terminals or soldering wiring when installing, but also adds a waterproof, dustproof and waterproof housing. It can be installed even outdoors. More convenient and easy for your life and use.

【Multiple Intelligent Control】 This Digital Programmable Socket can set up to 16 switching programs. Each program can be configured to run 1 to 16 cycles per day or per week or on the same day. The time range for each program is between 1 minute and 168 hours. You can turn your device on and off regularly to keep it running and extend its life.(Set the time to local time before use).

【Data Storage Function】Built-in lithium battery, with power-off memory function. Data can be saved for 60 days even after a power failure, without resetting the fixed switching program.

【Automatic Time Correction】 Automatic time correction ±60 seconds, change the AC power once a week (press the MANUAL key after setting the program and check whether AUTO mode is activated).

【Wide Use】 It is suitable for controlling the timing of electric lamps, advertising lamps, electrical boxes, drain pumps, water heaters, battery chargers, etc.

Product description

Attention:

The operating instructions indicate 12V diagram.

The POWER must be designed for the connection of 12 V DC. Never connect another power supply.The other side can be as needed.

If you want to connect 110V electrical appliances. The wiring depends on the 0-250V wiring diagram.

It doesn't matter which circuit diagram. The POWER only allows the connection of 12V DC.

The power ~ has no meaning, the voltage to be measured is DC12V.

Advanced preset one week earlier.

Digital electronic timer with daily programs.

Repeat programs with 16 on/off settings and manual override.

Lithium battery power reserve in case of power failure.

Automatic timer error correction ±60 seconds, every week.

DC switching current

Specification

Cut (MM): Φ64

Installation depth (mm): 21

Power consumption: 4.4VA

No-load current consumption: 0.015 mA

Resistive load (LVD .IEC) 16A / 110 AC

Inductive load cos.If not, press P key to find the corresponding schedule, and then press C/R key to delete the time schedule (Note: -: - means it has been deleted successfully).

After checking that the above two points are correct, turning on or off is not normal. Check if it was set to automatic position. Press the key to return to the current time, then press the Manual button until the display shows AUTO.

Bonus:

Waterproof cover

Suitable for outdoor installation, no need to worry about water and dust

Built-in cover

Can be embedded in the wall

Wiring connector

Wiring design, safe and convenient

• This product is sold by xiaosong on behalf of third parties. This is a compatible product. Thank you for your understanding and support.