12V 16A Digital Timer Socket with 16 Programs, Programmable Clock, Timer, and LCD Digital Display, Anti-Theft Protection with Waterproof Housing/Connection Terminal Block Set -

【12V Programmable Timer】Our product not only adds a set of connection terminal blocks, you do not need to purchase external terminals or soldering wiring when installing, but also adds a waterproof housing, waterproof to dust and water. It can be installed even outdoors. More convenient and easy for your life and use.

【Multiple Intelligent Control】 This Digital Programmable Socket can define up to 16 switching programs. Each program can be configured to run 1 to 16 cycles per day or per week or on the same day. The time range for each program is between 1 minute and 168 hours. You can turn your device on and off regularly to keep it running and extend its life. (Set the time to local time before use).

【Data Storage Function】Built-in lithium battery, with power-off memory function. Data can be recorded for 60 days even after a power outage, without resetting the fixed switching program. 【Automatic Time Correction】 Automatic time correction ± 60 seconds, change the AC power supply once a week (press the MANUAL button after setting the program and check if AUTO mode is enabled). 【Wide Application】 Suitable for controlling the timing of electric lamps, advertising lamps, electrical boxes, sump pumps, water heaters, battery chargers, etc. Product Description Caution: The instruction manual indicates a 12V circuit. The power supply must be designed for a 12V DC connection. Never connect another power supply. The other side can be used if needed. If you wish to connect 110V electrical devices, the wiring depends on the 0-250V wiring diagram. Regardless of the circuit diagram. The POWER input only allows connection to 12V DC. Power is meaningless; the voltage to be measured is DC12V. Advanced preset one week in advance. Digital electronic timer with daily programs. Repeat programs with 16 on/off settings and manual override. Lithium battery backup in case of power failure. Automatic timer error correction ± 60 seconds, weekly. DC switching current Specification Cut (MM): Φ64 Installation depth (mm): 21 Power consumption: 4.4VA No-load current consumption: 0.015 mA Resistive load (LVD, IEC): 16A / 110V AC Inductive load (cos. 0.6): 8A / 110V AC Incandescent lamp load: 1000W DC SWITCH: 16A DC Operating Accuracy: Type (+ -) 1 s/day Ambient Temperature: -10℃ - 55℃ Shortest Switching Time: 1 min Shortest Switching Interval: 1 min Number of Channels: 1 Number of Memory Locations: 16 Connection Type: Plug-in NOTE: The time setting must correspond to the chronological sequence, but cannot be set in a cross-referenced manner. The system will automatically shut down if no operation is performed within the 10 seconds and no data is saved. Functions 3, 4, and 5 cannot be used simultaneously. Tips: Do not turn on after setting Power ON or power off after setting Power OFF. Please check if DAY is correct or if it needs to be readjusted. After confirming that the ON/OFF time setting is correct, if it does not turn on or off during the setting process, check if another program has been deleted. If not, press the P button to find the corresponding program. Then press the C/R button to delete the time program (Note: -: - indicates that it has been successfully deleted). After verifying that the two points above are correct, if the activation or deactivation is not normal, check if it was set to the automatic position. Press the button to return to the current time, then press the Manual button until the screen displays AUTO. Bonus: Waterproof cover Suitable for outdoor installation, no need to worry about water and dust Built-in cover Can be recessed into the wall Wiring connector Safe and convenient wiring design