12V 16A Digital Timer Socket with 16 Programs, Programmable Clock, Timer, and LCD Digital Display, Anti-Theft Protection with Waterproof Housing/Connection Terminal Block Set

【12V Programmable Timer】Our product not only includes a set of connection terminals, eliminating the need to purchase external terminals or solder wiring for installation, but also features a waterproof, dustproof, and water-resistant housing. It can even be installed outdoors, making it more convenient and user-friendly.

【Multiple Intelligent Controls】This Digital Programmable Timer allows you to set up to 16 switching programs. Each program can be configured to run from 1 to 16 cycles per day, per week, or on the same day. The time range for each program is from 1 minute to 168 hours. You can regularly turn your device on and off to optimize its operation and extend its lifespan.

(Set the time to local time before use).

【Data Storage Function】Built-in lithium battery with power-off memory function. Data can be recorded for 60 days even after a power outage, without resetting the fixed switching program.

【Automatic Time Correction】 Automatic time correction ± 60 seconds, adjust the AC power once a week (press the MANUAL button after setting the program and check if AUTO mode is enabled).

【Wide Application】 Suitable for controlling the timing of electric lamps, advertising lamps, electrical boxes, sump pumps, water heaters, battery chargers, etc.

Product Description

Caution:

The instruction manual indicates a 12V circuit.

The power supply must be designed for a 12V DC connection. Never connect any other power supply. The other side can be used if needed.

If you wish to connect 110V electrical devices, the wiring depends on the 0-250V wiring diagram.

Regardless of the circuit diagram.

The POWER terminal only allows connection to 12V DC. The power rating is meaningless; the voltage to be measured is DC12V. Advanced preset one week in advance. Digital electronic timer with daily programs. Repeat programs with 16 on/off settings and manual override. Lithium battery backup in case of power failure. Automatic timer error correction ±60 seconds weekly. DC switching current. Specification: Cutout (MM): Φ64. Installation depth (mm): 21. Power consumption: 4.4VA. No-load current consumption: 0.015 mA.

Resistive load (LVD .IEC) 16A / 110 AC

Inductive load cos. 0.6 8 A / 110 V AC

Incandescent lamp load: 1000W

DC SWITCH: 16A DC

Operating accuracy: Type (+ -) 1 s / day

Ambient temperature: -10 ℃ - 55℃

Shortest switching time: 1 min

Shortest switching interval: 1 min

Number of channels: 1

Number of memory locations: 16

Connection type: Plug-in

NOTE:

The time setting must correspond to the chronological sequence, but cannot be set in a cross-referenced manner.

The system will automatically shut down if no operation is performed within 10 seconds and no data is entered.

Saved.

Functions 3, 4, and 5 cannot be used simultaneously.

Tips:

Do not turn on after setting Power ON or power off after setting Power OFF. Please check if DAY is correct or needs to be readjusted.

After confirming that the time ON and OFF settings are correct, if it does not turn on or off during the setting process, check if another program has been deleted. If not, press the P button to find the corresponding program, then press the C/R button to delete the time program (Note: -:- means it has been successfully deleted).

After verifying that the two points above are correct, if the activation or deactivation is not normal, check if it was set to the automatic position.

Press the button to return to the current time, then press the Manual button until the screen displays AUTO.

Bonus:

Waterproof cover

Suitable for outdoor installation, no need to worry about water and dust

Built-in cover

Can be recessed into the wall

Wiring connector

Safe and convenient wiring design