12V 16A digital timer with 16 programs, programmable clock, timer and digital LCD display, anti-theft protection with waterproof housing and terminal block.

Product Information

【12V Programmable Timer】Our product not only features terminal blocks, eliminating the need to purchase external terminals or solder wires, but also a waterproof, dustproof, and splashproof housing. It can also be installed outdoors. More convenient and easier to use.

【Multiple Smart Control Options】 This programmable digital outlet allows you to set up to 16 on/off schedules. Each schedule can be set to run 1 to 16 cycles per day, per week, or on the same day. The duration of each program ranges from 1 minute to 168 hours. You can regularly turn the device on and off to maintain its functionality and extend its lifespan. (Set the local time before use.)

【Data Memory Function】 Built-in lithium battery with memory function in case of power outage. The data can be recorded for 60 days even after a power outage without having to reset the fixed switching program.

【Automatic Time Correction】 Automatic time correction ±60 seconds, mains current adjustment once a week (after setting the program, press the MANUAL button and check if AUTO mode is activated).

【Wide Range of Applications】 Suitable for time control of lamps, advertising lights, distribution boxes, sewage pumps, water heaters, chargers, etc.

Product Description

Caution:

The instruction manual specifies a 12V circuit.

The mains connection must be designed for a 12V DC connection. Never connect any other power source. You can use the other side if necessary. If you want to connect 110V devices, the wiring follows the 0-250V wiring diagram. Regardless of the wiring diagram. The POWER terminal only allows the connection of 12V DC. The power rating is irrelevant; the measured voltage is 12V DC. Extended presetting up to one week in advance. Digital electronic timer with daily programs. Repeating programs with 16 on/off times and manual override. Lithium battery backup in case of power failure. Automatic timer error correction ±60 seconds per week. DC switching current. Specifications: Hole (mm): æ64. Mounting depth (mm): 21. Power consumption: 4.4 VA. No-load current consumption: 0.015 mA.

Resistance load (LVD .IEC) 16 A / 110 AC

Inductive load cos. 0.6 8 A / 110 V AC

Incandescent lamp load: 1000 W

DC switch: 16 A DC

Operating accuracy: Type (+ -) 1 s/day

Ambient temperature: -10 °C - 55 °C

Shortest switching time: 1 min

Shortest switching interval: 1 min

Number of channels: 1

Number of memory locations: 16

Connection type: Plug-in

NOTE:

The time setting must be in chronological order and cannot be configured in reverse.

The system switches off automatically if there is no operation and no signal is received for 10 seconds. No input.

Data stored. Functions 3, 4, and 5 cannot be used simultaneously. Note: Do not turn the device on again after turning it on, nor do you turn it off again after turning it off. Check that the day of the week is set correctly and whether it needs to be reset. If the device still cannot be turned on or off after checking the on/off times during setup, check whether another program has been deleted. Otherwise, press the P button to find the corresponding program, and then the C/R button to delete the time program (Note: -:- means it was successfully deleted).

After checking the two points above, check if automatic mode is enabled if activation or deactivation is not working correctly.

Press the button to return to the current time, and then press the "Manual" button until "AUTO" appears on the display.

Bonus:

Waterproof cover

Suitable for outdoor installation, not water and dust resistant

Integrated cover

Can be recessed into the wall

Connection cable

Safe and convenient wiring design

Functions

• Length25 cm
• Width15 cm
• Height2.1 cm
• Consumption4.4 W
• More information