12V 16A Socket 16 Program Digital Programmer Programmable Clock Timer Electrical Socket with LCD Digital Display Anti-Theft with Waterproof Case/Connection Terminal Set -

【12V Programmable Timer】Our product not only adds a set of connection terminal blocks, you don't need to purchase external terminals or soldering wiring when installing, but also adds a waterproof housing, dustproof and waterproof. It can be installed even outdoors. More convenient and easy for your life and use.【Multiple Intelligent Control】 This Digital Programmable Socket can set up to 16 switching programs. Each program can be configured to run 1 to 16 cycles per day or per week or on the same day. The time range for each program is between 1 minute and 168 hours. You can turn your device on and off regularly to keep it running and extend its life. (Set the time to local time before use).【Data Storage Function】Built-in lithium battery, with power-off memory function.Data can be saved for 60 days even after a power failure, without resetting the fixed switching program.【Automatic Time Correction】 Automatic time correction ±60 seconds, change the AC power once a week (press the MANUAL key after setting the program and check whether AUTO mode is activated).【Wide Use】 It is suitable for timing control of electric lamps, advertising lamps, electrical boxes, drain pumps, water heaters, battery chargers, etc.Product descriptionAttention:The operating instructions indicate 12V diagram.The POWER must be designed for the connection of 12 V DC. Never connect another power supply. The other side can be as needed. If you want to connect 110V electrical appliances. The wiring depends on the 0-250V wiring diagram. No matter which circuit diagram.The POWER only allows the connection of 12V DC. Power ~ does not make sense, the voltage to be measured is DC12V. Advanced preset one week earlier. Digital electronic timer with daily programs. Repeat programs with 16 on/off settings and manual override. Lithium battery power reserve in case of power failure. Automatic timer error correction ± 60 seconds, every week. Switching current DCSpecificationCut (MM): Φ64Installation depth (mm): 21Power consumption: 4.4VANo-load current consumption: 0.015mAResistive load (LVD .IEC) 16A / 110ACInductive load cos.0.6 8 A / 110 V ACIncandescent lamp load: 1000W DC SWITCH: 16A DC Operating accuracy: Type (+ -) 1 s / day Ambient temperature: -10 ℃ - 55 ℃ Shortest switching time: 1 min Shortest switching interval: 1 min Number of channels: 1 Number of memory slots: 16 Type of connection: Plug inNOTE: Time setting must match the chronological sequence, but cannot be set crosswise. The system with automatically exit if no operation within 10 seconds and no data saved. Function 3,4,5 cannot be used simultaneously Tips: Do not power on after setting Power ON or No power off after setting Power OFF, please check whether DAY is correct or needs to be readjusted.After confirming that the ON and OFF time setting is correct, if it does not turn on or off at the time of setting, check whether another program is deleted.If not, press P key to find the corresponding schedule, then press C/R key to delete the time schedule (Note: -: - means it has been deleted successfully).After checking that the above two points are correct, turning on or off is not normal. Check if it was set to automatic position. Press the key to return to the current time, then press the Manual button until the screen displays AUTO.Bonus:Waterproof coverSuitable for outdoor installation, no need to worry about water and dustBuilt-in coverCan be embedded in the wallWiring connectorWiring design, safe and convenient