12V 250A Remote Battery Disconnect Switch, Improved Long Distance Control, Prevents Battery Discharge

Features:

1. More Convenient: The wireless remote control allows you not to open the hood every time to turn off the power, just press the button on the remote control, then your car's power system is disconnected.
2. Battery Protection: Battery cutoff switch plays an important role in extending battery life, it effectively prevents the battery from discharging when not in use.
3. Space saving: Our battery switch does not have many complicated wires, eliminating annoying cable tangles, and its size is rather small, so it will not occupy much space.
4. Low Power Consumption: The power consumption of this switch is 5mA in standby and about 3W in working, so this product is energy efficient.
5.Convenient to use: The battery disconnect kit comes with two copper plates, two metal clips, and two copper nuts, meaning you can easily install it on either the positive or negative side.
Specifications:Item Type: Remote Battery Disconnect Switch
Material: ABS + Copper + Silver
Battery Model: CR2016 (one battery per remote switch, comes with a built-in battery)
Battery Capacity: 75mAh
Operating Voltage: DC11-15V
Rated Current: 250A
Starting Current: 450A (less than ten seconds)
Standby Current: 0.005A
Switch Size: Approx. 45 x 45 x 45 mm / 1.77 x 1.77 x 1.77 mm
Instructions:
Operating Voltage: The 12V and 24V remote control power-off switches cannot be mixed.12V is selected for a battery vehicle, and the corresponding voltage switch should be selected for most cars, small trucks, agricultural vehicles, etc.
Switching power consumption:
The power consumption of this switch is 5mA in standby and about 3W. in operation

Package list:

2 x Remote control 1 x Main power switch 1 x Cable lug 2 x Battery clip 1 x Copper connectors

Note:

1: Install a relay switch and turn it on, which will increase the power consumption of the battery. When leaving the vehicle, use the remote control to cut off the main power in time, to avoid power loss caused by too long power consumption and failure to start.2: Because the power supply to the set is cut off.The vehicle will malfunction in the alarm and on-board computer due to a power outage; the vehicle can only be used after a power outage.
3: When driving, do not disconnect the relay switch to prevent the generator voltage from increasing and damaging the vehicle's electrical components.